Search

In Stock

Device for Measuring Wave Propagation Speed and Wavelength

Calibrated Measurement Scale with Markers: Allows precise determination of wavelength and wave displacement.

Stable Wave Generation and Guidance System: Ensures uniform wave travel for repeatable and reliable measurements.

$14.01

Quick Answer: The Device for Measuring Wave Propagation Speed and Wavelength is physics teaching apparatus that produces waves of a known frequency in a medium so that their wavelength, and from it their speed, can be measured. It lets students verify the wave equation v = fλ, the core relationship linking wave speed and wavelength.

The Measurement Principle

Every periodic wave obeys v = fλ: the speed of propagation equals the frequency multiplied by the wavelength. If the frequency is set by a vibrator, oscillator or timer, measuring the wavelength gives the speed directly. Alternatively, the time a single pulse takes to travel a measured distance gives the speed, and dividing by the frequency gives the wavelength. Doing both and comparing the answers is a strong check on the method.

Wavelengths are easiest to measure from a standing wave. When a wave reflects from a fixed end and meets the incoming wave, nodes and antinodes form at fixed positions, and the distance between neighbouring nodes is half a wavelength. Measuring across several nodes and dividing reduces the error from judging where each node lies.

About This Apparatus

The listing describes the device by its purpose rather than its construction, so the medium it uses (a stretched string or spring, a water surface, or sound in air) and the frequency source supplied should be confirmed before ordering. The method of measurement is the same in each case: fix or measure the frequency, locate nodes, crests or pulse arrival times along a scale, and calculate the speed. Changing the tension of a string, the depth of water or the temperature of air then shows how the speed depends on the medium.

Specifications

Apparatus Device for measuring wave propagation speed and wavelength
Relationship tested v = fλ
Measurement methods Node spacing in standing waves; timing of travelling pulses
Level Secondary and introductory college physics
Wave medium, frequency source and scale supplied Confirm at enquiry

Investigations

  • Verifying v = fλ at several frequencies
  • Measuring wavelength from the spacing of nodes in a standing wave
  • Timing a pulse over a measured distance to find wave speed
  • Investigating how wave speed changes with the properties of the medium
  • Comparing transverse and longitudinal waves

Care & Handling

  • Start any vibrator or signal source at low amplitude and increase slowly, to avoid overstretching strings or springs.
  • Keep electrical drives and their leads clear of water if a water-wave medium is used.
  • Release string or spring tension after the practical so the medium does not stretch permanently.
  • Store accessories in their box so measuring scales are not bent or marked.

Why Choose LabEquip

Physics departments use apparatus like this in the waves topic, where each group needs to measure a wavelength and calculate a speed for itself. LabEquip lists it in Physics Equipments; for standing waves on a string, the Melde vibrator cord is a related item. Please confirm construction and accessories via the LabEquip contact page.

Frequently Asked Questions

Why is the distance between two nodes half a wavelength?

In a standing wave, nodes occur where the incoming and reflected waves always cancel. This happens every half-wavelength along the medium, so neighbouring nodes are separated by λ/2.

Does changing the frequency change the wave speed?

Not in a non-dispersive medium such as a string at fixed tension. Raising the frequency shortens the wavelength in proportion, so their product, the speed, stays the same. For water waves, speed does depend on wavelength and depth.

How can I reduce errors in measuring wavelength?

Measure the distance across as many nodes or crests as possible and divide by the number of half or whole wavelengths spanned. Viewing the medium against a fixed scale and repeating each measurement also helps.

What is the difference between transverse and longitudinal waves?

In transverse waves the particles of the medium move at right angles to the direction of travel, as on a string. In longitudinal waves they move back and forth along it, as in sound. Both obey v = fλ.

Why does the speed of a wave on a string increase with tension?

The speed equals the square root of tension divided by mass per unit length. A tighter string pulls each displaced section back more strongly, so disturbances pass along it faster.

Can the same method measure the speed of sound?

Yes, in principle. With a known frequency from a tuning fork or signal generator, finding the positions of resonance in a tube or the spacing of nodes in a standing sound wave gives the wavelength, and v = fλ gives the speed of sound.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)