Search

In Stock

Demonstration Meter, Interscale

Universal Moving-Coil Movement: Features a high-sensitivity permanent magnet moving coil (PMMC) assembly with a zero-point adjustment, ensuring a linear response and 2\% full-scale accuracy across all measurement parameters.

Rapid Interchangeable Dial System: Includes a set of high-contrast, slide-in scales that automatically engage internal precision shunts or multipliers, enabling seamless transitions between AC/DC voltage, current, and center-zero galvanometer modes.

₹1,120.00

Quick Answer: An interscale demonstration meter is a large-dial classroom meter built on a single moving-coil movement, with interchangeable scales that set it up as a galvanometer, ammeter or voltmeter. Teachers use it to show circuit readings to a whole class and to explain that all these meters share one basic movement.

One Movement, Several Meters

The name refers to interchangeable scales. In the usual interscale design, a dial card slides into the front of the meter and connects through sockets to the movement, and each card carries both its printed scale and the resistance needed for that function. Fitting a different card changes the meter from a sensitive galvanometer to an ammeter or a voltmeter without any rewiring by the teacher.

This makes the meter a teaching aid as well as a measuring instrument. A class can be shown that an ammeter is the galvanometer movement with a low-resistance shunt across it, so that most of the current bypasses the coil, and that a voltmeter is the same movement with a high resistance in series, so that it draws very little current. Where the case is transparent, students can also see the coil, magnet and hairsprings move as the reading changes.

The large dial and long pointer are sized for a lecture bench, so the reading can be followed from the back of the room while the teacher builds the circuit in front of the class.

Lessons It Supports

  • Demonstrating Ohm’s law with current and voltage readings visible to the whole class
  • Explaining how a galvanometer is converted into an ammeter or a voltmeter
  • Showing that current is the same at every point in a series circuit
  • Comparing branch currents in parallel circuits during whole-class teaching

Specifications

Type Large-dial demonstration meter with interchangeable scales
Movement Moving coil
Functions Galvanometer, ammeter or voltmeter, depending on the scale fitted
Viewing Large dial and pointer for whole-class reading
Scales supplied and their ranges Confirm at enquiry

Choosing and Changing Scales

Start every demonstration with a scale that comfortably covers the expected reading, then change to a more sensitive one if the deflection is small. Disconnect the circuit, or at least switch off the supply, before changing the dial card, so that the movement is never briefly connected without its shunt or series resistance.

Care & Handling

  • Switch off the supply before changing a scale card.
  • Begin with a less sensitive scale and move to a more sensitive one only once the reading is known to be small.
  • Keep the scale cards flat and clean in their storage slots so that their contacts seat properly.
  • Carry the meter upright and avoid knocks, which can bend the long pointer.

Why Choose LabEquip

Physics teachers buy the interscale demonstration meter so that one instrument can serve lessons on current, voltage and meter conversion at the front of the class. LabEquip lists it in its physics lab equipment range alongside the vertical demonstration meter, and the scales you need can be agreed through our contact page.

Frequently Asked Questions

What does interscale mean?

It means the meter has interchangeable scales. Each scale card fits the same movement and sets the meter up for a particular function and range, such as a galvanometer, an ammeter or a voltmeter.

How can one meter work as both an ammeter and a voltmeter?

The movement is a sensitive galvanometer. For an ammeter a low-resistance shunt is connected across it so most current bypasses the coil; for a voltmeter a high resistance is placed in series. The scale card supplies the right resistance and the matching printed scale.

Is it suitable for student practical work?

It is designed for demonstrations at the front of the class. Students usually measure with smaller bench meters, while the teacher uses the large dial to show the same quantities to everyone.

Why should the supply be off when changing scales?

While a scale card is being removed, the movement can be briefly connected without its shunt or series resistance. A current that is safe for the meter as a whole could then pass straight through the delicate coil.

Can the class see how the meter works inside?

Where the case is transparent, the coil, magnet and hairsprings are visible, which helps when explaining the moving-coil principle. The case style of the supplied model can be checked when ordering.

How does it differ from a vertical demonstration meter?

Both are large classroom meters. The interscale meter changes its function by swapping scale cards on one movement, while a vertical demonstration meter is chosen mainly for its upright, highly visible dial.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)