Search

In Stock

Decanter Bulb Pack on Stand

Pack ampoule à décanter sur support, Borosilicate 3.3 Thermal Integrity allows for safe Application of heated solvent extractions, minimizing the risk of thermal shock and reinforcing laboratory safety protocols.

Ampoule incassable, Reinforced Ring Support Stand Ensures vertical axial stability during high-torque stopcock adjustments, enabling student Evaluation of experimental reproducibility without mechanical interference.

Standardized Tapered Glass Stopper maintains an airtight seal for vigorous agitation protocols, supporting the Synthesis of purified compounds during vocational laboratory rotations.

$12.01

Quick Answer: A separatory funnel on stand is a pear- or bulb-shaped glass funnel with a stopper at the top and a stopcock at the bottom, held upright in a ring or clamp on a support stand. The separatory funnel on stand is used to separate two liquids that do not mix and to carry out liquid-liquid extractions.

Why the Funnel Belongs on a Stand

A separatory funnel is shaken by hand, but separation happens while it stands still. Holding it in a ring on the stand lets the layers settle undisturbed, keeps both hands free to work the stopcock and the stopper, and sets the stem at a fixed height above the collecting flask. The stand also keeps the full funnel stable, which matters with organic solvents.

With a set, the funnel, ring and stand are matched, so the funnel sits securely at the right height. A beaker or flask is placed underneath, the stopper is removed so air can enter, and the stopcock is opened to run off the lower layer.

Getting the Most from an Extraction

In an extraction a solute moves from one solvent into a second, immiscible solvent in which it dissolves better. The ratio of its concentrations in the two layers at equilibrium is the partition coefficient, K. Suppose K = 4 in favour of the organic layer and equal volumes are used. One extraction leaves 1/(1 + 4), or 20 percent, of the solute behind in the water.

Split the same organic solvent into three equal portions and extract three times, and each step leaves 1/(1 + 4/3) of what remained. After three steps only about 8 percent is left. Several small extractions with the separatory funnel on stand recover more than one large one.

Specifications

Product Separatory funnel set with support
Funnel Glass, with stopper and bottom stopcock
Support Stand with ring or clamp to hold the funnel upright
Technique Liquid-liquid extraction and layer separation
Funnel capacity and stand parts Confirm at enquiry

Separations for Teaching Labs

  • Separating oil from water to show immiscibility and density
  • Liquid-liquid extraction of a dissolved substance into an organic solvent
  • Recovering the oil layer after steam distillation of plant material
  • Washing an organic product with water or a dilute aqueous solution

Care & Handling

  • Fill the funnel no more than about two-thirds full so there is room to shake and vent
  • Vent often while shaking, pointing the stem away from people, then return it to the ring
  • Rinse the funnel and stopcock immediately after use and store with the stopcock open or loosened
  • Check the ring or clamp is tight on the stand before pouring liquid in

Why Choose LabEquip

Chemistry teachers in schools and colleges who run extraction practicals buy the separatory funnel on stand as a ready unit for each bench. LabEquip also supplies loose separating funnels and separatory funnel holders for larger labs, plus physics lab equipment for shared science departments; send LabEquip your bench count.

Frequently Asked Questions

Why is a separatory funnel held on a stand rather than by hand?

The layers need to settle completely before they are separated, which takes a still funnel. The stand also frees both hands for the stopper and stopcock and holds the stem at a steady height over the receiver.

Are several small extractions better than one large one?

Yes. With a partition coefficient of 4 and equal volumes, one extraction leaves 20 percent of the solute behind, while three extractions with a third of the solvent each leave only about 8 percent.

Which layer comes out first?

The denser liquid forms the lower layer and is run out through the stopcock. Pour the upper layer out through the top neck so it does not pick up traces of the lower layer left in the stem.

Why must the stopper be removed before draining?

With the stopper in place, air cannot enter to replace the liquid running out, so a partial vacuum forms and the flow slows or stops. Removing it lets the layer drain smoothly.

What simple separations suit a school class?

Separating cooking oil from water, extracting a coloured substance from water into an immiscible solvent in a fume cupboard, and collecting an oil layer after steam distillation of plant material.

Which funnel size and stand come in the set?

The funnel capacity and the stand components can be confirmed at enquiry. For class practicals, a funnel two to three times the volume of liquid being separated leaves room to shake.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)