Search

In Stock

Crane Scale, Stainless Steel

IP67-Rated Surgical Steel Housing: Encased in a non-corrosive, 304-grade stainless steel chassis designed to withstand high-pressure washdowns and chemical exposure while protecting the internal tension load cell from oxidative degradation.

High-Resolution Sigma-Delta ADC: Features an advanced analog-to-digital conversion matrix with a 24-bit internal resolution, providing rapid stabilization and filtered data acquisition to maintain accuracy during dynamic load swaying or mechanical vibration.

₹985.00

Quick Answer: The Crane Scale, Stainless Steel is a hanging crane scale specified in stainless steel, used between a crane or hoist and its load to weigh suspended goods. A stainless steel crane scale suits wet, washdown and corrosive areas such as food processing, fisheries, chemical plants and coastal or marine sites.

Why Stainless Steel

Stainless steels resist rust because their chromium content forms a thin, self-repairing oxide film on the surface. In practice, a stainless crane scale tolerates washing, splashes of brine and the humid air of cold stores and coastal sites far better than painted carbon steel, and it does not shed rust flakes or paint chips onto food or products below. Which parts of this scale are stainless, the housing, the hooks or both, should be confirmed together with the capacity.

Compared with the standard crane scale, the weighing principle is the same, with the tension in the line between crane and load measured electronically; the difference lies in the materials and in suitability for hygienic or corrosive surroundings.

Care & Handling

  • Rinse off salt, brine and food residues after use and dry the stainless steel crane scale before storage.
  • Inspect the hooks and fittings before every lift, and withdraw the scale if any are deformed or cracked.
  • Keep within the rated capacity of the scale and of the lifting equipment.
  • Avoid cleaners containing chlorides and abrasive pads that scratch the surface finish.

Cleaning and Hygiene

In food and pharmaceutical settings, a hanging scale is cleaned along with the line it serves. Use neutral or mildly alkaline detergents and rinse with clean water; chloride-rich cleaners and bleach left on the surface can pit even stainless steel. Do not aim high-pressure jets at seams, displays or battery covers unless the scale’s enclosure is rated for them, and dry the scale before storage.

Applications

  • Weighing carcasses, fish crates and produce on overhead lines in food processing
  • Weighing drums and containers in chemical and pharmaceutical plants
  • Lifting and weighing on ships, docks and coastal sites
  • Cold-store and humid-area weighing where carbon steel would corrode

Specifications

Type Hanging crane scale, stainless steel
Measuring principle Tension in the lifting line, sensed electronically
Suited to Washdown, humid, saline and chemical areas
Mounting Between the crane or hoist hook and the load
Capacity, readability, stainless parts and enclosure rating Confirm at enquiry

Why Choose LabEquip

Food processors, fisheries and chemical plants choose stainless crane scales because they withstand cleaning and corrosive surroundings. LabEquip lists this one in its physics lab products. Share your capacity, environment and cleaning routine through the contact page so the right version can be offered.

Frequently Asked Questions

Why choose a stainless steel crane scale over a standard one?

Stainless steel resists rust in wet, salty and chemical environments and can be cleaned with detergents without paint flaking off. A standard scale is suitable for dry indoor use where corrosion is not a concern.

Can stainless steel still corrode?

Yes, under some conditions. Chlorides from salt, brine or bleach left on the surface can cause pitting, especially in crevices. Rinsing with clean water and drying after use prevents most problems.

Can the scale be hosed down?

Only if its enclosure is rated for water jets. Otherwise, wipe it with a damp cloth and detergent, rinse gently, and keep water away from the display and the battery compartment.

Is the weighing principle different from the standard crane scale?

No. Both measure the tension in the line between crane and load with an electronic sensor; the difference is in the materials and the suitability for harsh environments.

How should the scale be hung?

Seat the top fitting fully in the crane hook so the scale hangs straight, then attach the load to the bottom hook. A scale hung at an angle or on the tip of a hook is unsafe and reads incorrectly.

How is a crane scale checked for accuracy?

By hanging known test masses, or a load first weighed on a calibrated platform scale, and comparing the readings. Sites that use the scale for trade or records usually arrange periodic checks by a calibration service.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)