Quick Answer: Complete Laplace rails are a bench apparatus in which a metal rod rests across two parallel conducting rails inside the field of a magnet, so that it rolls when a current passes through it. They demonstrate the Laplace force on a current-carrying conductor in a magnetic field, known in English textbooks as the motor effect.
How the Rolling Rod Works
The two rails are connected to a low-voltage DC supply, and the rod lying across them completes the circuit. Current therefore flows along the rod at right angles to the field between the magnet poles. The conductor experiences a force F = BIL, where B is the flux density, I the current and L the length of rod inside the field, and the rod rolls along the rails in the direction of that force.
Fleming’s left-hand rule predicts which way it goes: first finger along the field, second finger along the current, thumb along the motion. Reversing either the current or the field reverses the motion, while reversing both leaves it unchanged, a check of the rule that students can carry out themselves.
Specifications
| Apparatus | Two parallel rails with a rolling conducting rod |
| Field | Magnet mounted over the rails |
| Supply | Low-voltage direct current through terminal sockets |
| Base | Rigid base with end supports, as pictured |
| Full parts list | Confirm at enquiry |
What the Complete Set Looks Like
In the product photograph the rails run between two black end supports on a grey base, with a magnet assembly over them, a rolling rod carrying a white disc and a red terminal socket at one end. The word complete indicates a set that includes its magnet rather than rails alone, so it is ready to use with a power supply and leads. The white disc turns with the rod and makes even slow movement easy for a class to follow.
Experiments
- Showing the direction of the force with Fleming’s left-hand rule
- Reversing the current and then the field to see the rod change direction
- Comparing a small and a larger current to show that the force grows with current
- Introducing the principle behind electric motors, loudspeakers and moving-coil meters
Care & Handling
- Keep the rails and rod clean and dry; oxide or grease at the contact points makes the rod stutter
- Use a current-limited low-voltage supply and switch on only for short runs, because the rod and rails form a low-resistance path
- Keep steel tools and loose iron objects away from the magnet
- Store the rod with the set so it is not bent; a bent rod will not roll evenly
Why Choose LabEquip
Laplace rails suit teachers who want students to watch a single conductor move before meeting motor coils. LabEquip offers them with the motor module with magnets and other physics lab equipment; ask about class sets through the contact page.
Frequently Asked Questions
Why is it called the Laplace force?
French physics teaching names the force on a current-carrying conductor in a magnetic field after Pierre-Simon Laplace. English textbooks usually call the same effect the motor effect, with the force given by F = BIL.
What makes the rod roll faster?
A larger current, a stronger magnetic field or a longer length of rod inside the field all increase the force. Friction at the rails and the mass of the rod limit how quickly it speeds up.
Can the apparatus run on alternating current?
Not usefully. With AC the current reverses many times a second, so the force reverses too and the rod only vibrates instead of rolling. A DC supply is needed.
Why does the rod sometimes stop halfway?
Usually because of poor contact: dust, oxide or a slightly bent rod interrupts the current. Cleaning the rails and the rod ends normally restores smooth rolling.
Does the rolling rod also generate a voltage?
Yes. A conductor moving through a magnetic field has an emf induced across it that opposes the supply. It is small at these speeds, but it is the same back-emf that limits the current in a running motor.
How does this relate to an electric motor?
A motor uses the same force on many turns of wire arranged in a coil, with a commutator to keep the turning effect in one direction. The rails show the force on a single straight conductor, which is easier to analyse.
Last Updated: October 2026










Reviews
There are no reviews yet.