Quick Answer: The 6-turn coil is a coil of six turns of thick insulated conductor for a demountable transformer, used as a secondary that delivers a large current at a low voltage. The product photograph shows it with wooden-handled fittings and metal rings of the kind used in high-current demonstrations.
Why Only Six Turns
In a transformer the currents are roughly in the inverse ratio of the turns: I_s/I_p ≈ N_p/N_s. If the primary has many hundreds of turns and the secondary only six, the secondary current can be many times the primary current, while the secondary voltage is correspondingly small. The 6-turn coil uses this to produce currents far beyond what a school power supply could deliver directly.
A thick conductor is needed because the heating in a wire rises with the square of the current. A thin winding would overheat at once; a few turns of heavy conductor keep the resistance low and let the large current flow where it is wanted, into the object being heated.
Specifications
| Coil | Six turns of heavy insulated conductor, as titled |
| Role | Low-voltage, high-current secondary |
| Used with | Laminated core and a primary coil of many turns |
| Shown in the photograph | Wooden-handled fittings and metal rings |
| Parts supplied with the coil | Confirm at enquiry |
High-Current Demonstrations
Classic uses include heating an iron nail held between clamps until it glows, spot-welding two thin metal strips, and melting a little solder in a ring-shaped trough placed over the core. Each shows that a transformer exchanges voltage for current and that a large current produces strong heating, the principle behind resistance welding and induction heating.
Demonstrations
- Heating a nail or wire to show the effect of a large current
- Demonstrating the principle of resistance welding
- Comparing secondary and primary currents to test the inverse turns ratio
- Introducing induction heating and transformer design
Care & Handling
- Only teachers should run high-current demonstrations; keep students at a distance
- Handle the coil and fittings by their insulated or wooden parts, and let heated pieces cool before touching
- Run the demonstration in short bursts and switch off straight afterwards
- Place a heat-resistant mat under the apparatus and keep flammable materials away
- Supply the primary from the low-voltage source specified for the kit
Why Choose LabEquip
The 6-turn coil is bought by schools that already own a demountable transformer and want its most striking demonstrations. LabEquip supplies it with the U core, the modular transformer and other physics lab equipment.
Frequently Asked Questions
Why does a coil with so few turns give a large current?
The current ratio in a transformer is the inverse of the turns ratio. With far fewer turns on the secondary than on the primary, the secondary current is much larger.
Is the voltage across the 6-turn coil dangerous?
No, it is very low. The hazard is the large current and the heat it produces, which can burn skin and ignite flammable material.
Why is the wire so thick?
Heating increases with the square of the current. A thick conductor has a low resistance, so it carries the large current without overheating itself.
What primary coil should be used with it?
A primary of many turns designed for the low-voltage AC supply of the kit, fitted on the same closed core.
How does this relate to welding?
Resistance welding passes a very large current through the joint between two metal pieces. The heat at the joint melts the metal locally and fuses the pieces together.
Can students repeat the demonstration?
It should stay a teacher demonstration because of the heat produced. Students can safely take the low-current measurements that test the turns ratio.
Last Updated: October 2026










Reviews
There are no reviews yet.