Search

In Stock

Calorimeter Copper With Thermometer Support & Stirrer

High-Purity Spun Copper Vessel: Fabricated from oxygen-free copper, the inner chamber is optimized for rapid thermal conductivity and a low specific heat constant to ensure high-fidelity measurements of fluid temperature differentials.

Engineered Suspension Lid: Features a precision-drilled thermometer aperture with an integrated support clamp to prevent probe-to-vessel contact, paired with a low-friction stirrer for maintaining uniform temperature gradients without introducing external kinetic heat.

₹645.00

Quick Answer: The Calorimeter Copper With Thermometer Support and Stirrer is a copper calorimeter fitted with a holder that keeps the thermometer fixed in the liquid, plus a stirrer. A calorimeter with thermometer support suits experiments that need many readings over time, such as cooling curves and timed electrical heating.

What the Thermometer Support Adds

In a plain calorimeter the thermometer is either held by hand or left leaning against the rim, where it can slide down to touch the bottom or the wall. Both give wrong readings, because the copper wall is not always at the same temperature as the middle of the liquid. The support holds the thermometer upright with its bulb at a fixed depth in the liquid, clear of the metal.

This frees both hands for the stirrer and the stopwatch, and it keeps the bulb in the same place for every reading. In experiments that take readings every half-minute for a quarter of an hour or more, that consistency is what makes a smooth, usable graph.

Experiments That Need Steady Readings

  • Verifying Newton’s law of cooling from a temperature-time graph
  • Verifying Joule’s law of heating with a heating coil and low-voltage supply
  • Finding the specific heat capacity of a liquid by the method of mixtures
  • Recording heating and cooling curves for project work

Plotting a Cooling Curve

To study Newton’s law of cooling, hot water is poured into the copper calorimeter and the temperature is read at regular time intervals while the liquid is stirred gently. A graph of temperature against time falls steeply at first and then more slowly as the water approaches room temperature. The slope at any point, the rate of cooling, turns out to be roughly proportional to the excess temperature above the surroundings, which is the law being tested.

The same arrangement serves for verifying Joule’s law of heating: a heating coil in the water is supplied from a low-voltage source, and the temperature rise over a fixed time is compared for different currents. Electrical leads should be kept away from spills and the supply switched off before the coil is lifted out.

Specifications

Type Copper calorimeter with thermometer support
Included parts Copper vessel, thermometer support and stirrer
Purpose of the support Holds the thermometer bulb at a fixed depth, clear of the wall and base
Used with Laboratory thermometer and stopwatch
Support design and thermometer diameter accepted Confirm at enquiry

Care & Handling

  • Fit the thermometer into the support gently and never force a thermometer of a larger diameter.
  • Remove the thermometer before emptying or carrying the calorimeter.
  • Wipe the support and stirrer dry after use so that joints do not corrode.
  • Keep the copper vessel bright, since a tarnished surface radiates heat faster and steepens the cooling curve.

Why Choose LabEquip

Colleges and senior schools that run cooling-curve and heating practicals choose this calorimeter so that students can record long series of readings without holding the thermometer. LabEquip also lists laboratory thermometers in its wider range, and the physics equipment category holds the other calorimeter versions. Ask about class sets through the contact page.

Frequently Asked Questions

Why must the thermometer bulb not touch the calorimeter wall?

The copper wall exchanges heat with the air outside and may be slightly cooler or warmer than the liquid in the middle. A bulb touching it would read the wall temperature instead of the liquid temperature.

How is Newton’s law of cooling tested with this calorimeter?

Fill it with hot water, stir gently and read the temperature at regular intervals as it cools. Plot temperature against time, find the rate of cooling at several points and show that it is roughly proportional to the excess temperature over the room.

Can the thermometer support hold a digital probe?

A slim digital probe can be held in the same way as a glass thermometer if its stem fits the support. Check the diameter of the probe against the support opening before relying on it.

Why is a stirrer still needed when the thermometer is fixed?

A fixed thermometer reads only the liquid around its bulb. Without stirring, warmer liquid rises and cooler liquid sinks, so the reading would not represent the whole contents of the calorimeter.

How often should readings be taken for a cooling curve?

Take them frequently at the start, when the temperature falls fastest, and less often later. Readings at equal intervals make the graph easier to plot, and a stopwatch started at the first reading keeps the timing honest.

Is this calorimeter suitable for electrical heating experiments?

Yes, with a separate heating coil and a low-voltage supply. Keep the leads and connections dry and above the liquid, and switch off before removing the coil or changing the water.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)