Quick Answer: The Calorimeter Copper With Stirrer is a copper calorimeter vessel supplied with a matching stirrer for mixing its contents during heat-exchange experiments. Stirring gives every part of the liquid the same temperature, so a copper calorimeter with stirrer yields more reliable method-of-mixtures results than an unstirred cup.
Why Stirring Changes the Result
When a hot solid is dropped into water, or two liquids at different temperatures are mixed, the heat does not spread evenly on its own. Warm liquid rises, cool liquid sinks and layers form, and a thermometer in one place reads only its own layer. The stirrer, usually a ring or loop on a long stem, is moved up and down to break up these layers until the thermometer reading stops changing.
Because the stirrer is in contact with the liquid it also takes up a little heat. Laboratory stirrers for copper calorimeters are therefore made of a light, thin metal, and their mass is included with the vessel when its heat capacity is worked out.
Specifications
| Type | Copper calorimeter with stirrer |
| Included parts | Copper vessel and stirrer |
| Stirrer action | Moved up and down to mix the liquid evenly |
| Used with | Laboratory thermometer, outer jacket or insulating box if required |
| Vessel size and stirrer material | Confirm at enquiry |
Method-of-Mixtures Experiments
- Finding the specific heat capacity of a liquid such as an oil by mixing it with hot water
- Finding the specific heat capacity of metal pieces heated in boiling water
- Estimating the temperature of a flame or furnace from a heated metal bob
- Demonstrating thermal equilibrium when hot and cold water are mixed
Estimating the Temperature of a Flame
A memorable use of the copper calorimeter with stirrer is to estimate the temperature of a Bunsen flame. A small metal ball or bob of known mass is held in the flame until it reaches the flame temperature, then dropped quickly into a weighed quantity of water in the calorimeter. Stirring until the temperature is steady and applying the heat balance gives the temperature the metal must have had.
The answer is only an estimate, because heat is lost during the transfer and the specific heat of the metal changes at high temperatures, but it shows students how calorimetry can measure temperatures far beyond the range of a laboratory thermometer.
Care & Handling
- Keep the stirrer with its own vessel, since the two are weighed together for the heat capacity.
- Straighten a bent stirrer stem carefully; a bent stem scrapes the thermometer and the wall.
- Dry both parts after use and store them so that the stirrer loop is not crushed.
- Do not drop heavy objects into the vessel, which can dent its thin base.
Why Choose LabEquip
This is the everyday calorimeter for school physics benches, bought in class sets for the method-of-mixtures practicals. For longer experiments where heat loss matters, LabEquip offers the copper calorimeter with wooden box, and both are listed in our physics equipment category. Order quantities can be discussed via the contact page.
Frequently Asked Questions
Why is stirring important in calorimetry?
Without stirring, the liquid forms warmer and cooler layers and the thermometer reads only the layer around its bulb. Stirring evens out the temperature so that the reading represents the whole mixture.
Should the stirrer be included when calculating the heat capacity?
Yes. The stirrer is in contact with the liquid and changes temperature with it, so its mass is added to the mass of the vessel, or its own heat capacity is added separately if it is a different metal.
How is the specific heat capacity of a liquid found with this calorimeter?
Put a weighed amount of the liquid in the calorimeter, add a weighed amount of hot water or a heated metal of known specific heat, and stir until the temperature is steady. The heat lost by the hot body equals the heat gained by the liquid and the vessel.
How can a copper calorimeter estimate the temperature of a flame?
Heat a metal bob of known mass and specific heat in the flame, drop it into water in the calorimeter and stir. The temperature rise of the water and vessel gives the heat released, from which the initial temperature of the bob is calculated.
Can this calorimeter be used without an outer jacket?
Yes, for short experiments such as mixing hot and cold water. For longer experiments, standing it inside an insulated jacket or box reduces heat loss and improves accuracy.
What is the correct way to move the stirrer?
Move it gently up and down without lifting the loop above the liquid surface. A steady, slow rhythm mixes the liquid well without splashing and without adding noticeable heat by friction.
Last Updated: October 2026










Reviews
There are no reviews yet.