Search

In Stock

Bucket and Cylinder, Brass

Solid Brass Construction: Engineered from high-density, non-corrosive brass to ensure long-term durability and consistent mass during repeated submersion in aqueous laboratory environments.

Matched Geometric Volume: Features a hollow bucket and a solid cylinder designed with exact tolerances, ensuring the cylinder fits perfectly inside to facilitate high-accuracy displacement calculations.

$3.27

Quick Answer: The Bucket and Cylinder, Brass is a two-piece set for proving Archimedes’ principle: a solid brass cylinder fits exactly inside a hollow brass bucket of the same volume. Weighing the pair in air, with the cylinder in water and then with the bucket filled, shows that the upthrust equals the weight of water displaced.

The Classic Proof of Archimedes’ Principle

The key property of the set is that the cylinder fills the bucket exactly, so the volume of water the cylinder pushes aside is the same as the volume the bucket holds. The bucket hangs from the hook of a balance and the cylinder hangs below it from a hook on the bucket’s base. With both in air, the balance is brought to a steady reading.

A beaker of water is then raised until the cylinder is fully submerged. The reading falls, because the water pushes up on the cylinder with a force equal to the weight of liquid displaced. Finally the bucket is filled to the brim with water. The balance returns to its first reading: a bucketful of water, exactly the displaced volume, has replaced the lost weight. The pair makes this a direct, measured demonstration rather than a calculation.

Brass is used because it is dense, so the cylinder sinks readily, and it does not rust in water. The set works with a physical balance that has a hook beneath one pan, or with a spring balance for a quicker class version. The metal overflow can offers the alternative displacement method, and our Archimedes principle kit groups the pieces for a spring-balance practical. The cylinder’s size and mass are not stated in the title.

Specifications

Material Brass, as titled
Parts Hollow bucket and solid cylinder that fits inside it exactly
Principle Upthrust equals the weight of liquid displaced
Used with A balance with a hook and a beaker of water
Size and mass Confirm at enquiry

Experiments

  • Verifying Archimedes’ principle with balance readings in secondary physics
  • Repeating the test in salt water to show that upthrust depends on liquid density
  • Finding the relative density of a liquid from the loss in weight of the cylinder
  • Demonstrating the hydrostatic balance method to college students

Care & Handling

  • Dry the bucket and cylinder after each use to prevent water marks and tarnish.
  • Fill the bucket slowly to the brim without spilling down its sides, which would add extra weight.
  • Make sure the submerged cylinder hangs clear of the beaker’s sides and base.
  • Store the cylinder inside the bucket to protect the close fit between them.

Why Choose LabEquip

Physics teachers choose a brass bucket and cylinder when they want Archimedes’ principle shown with numbers on the balance, not just stated. It is part of our Physics Equipments; contact LabEquip for the dimensions of the current set.

Frequently Asked Questions

Why must the cylinder fit the bucket exactly?

The proof depends on the bucket holding exactly the volume of water the cylinder displaces. Filling the bucket then adds back a weight of water equal to the upthrust, and the balance returns to its original reading.

Which balance is used with this set?

A physical balance with a hook beneath one pan gives the most precise result, and a spring balance gives a quicker class demonstration. The bucket hangs from the hook with the cylinder suspended under it.

What does the drop in the balance reading show?

It equals the upthrust of the water on the submerged cylinder. By Archimedes’ principle this is the weight of the volume of water the cylinder displaces.

Can liquids other than water be used?

Yes. Upthrust depends on the density of the liquid, so the drop in reading is larger in salt water and smaller in spirit. Fill the bucket with the same liquid to restore the balance.

How can the set find the relative density of a liquid?

Measure the loss in weight of the cylinder in the liquid and in water. The ratio of the two losses is the relative density of the liquid, because the displaced volume is the same in both.

Why is brass used for this set?

Brass is dense enough for the cylinder to sink well below the surface, does not rust in water and keeps its shape, so the close fit between bucket and cylinder lasts.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)