Search

In Stock

BROWN GLASS DROPPER

Amber Borosilicate Glass Tube: Reduces UV and visible light exposure to preserve reagent integrity.

Precision Rubber Bulb Control: Allows consistent drop-wise dispensing for accurate volume handling.

₹215.00

Quick Answer: The Brown Glass Dropper is an amber-tinted glass dropper bottle, fitted in its usual form with a glass pipette and rubber teat, for keeping light-sensitive solutions and dispensing them a drop at a time. The brown glass cuts down the light that slowly breaks down reagents such as silver nitrate, iodine and hydrogen peroxide.

What the Amber Tint Does

Brown, or amber, glass contains additives that absorb ultraviolet light and much of the blue and violet end of the visible spectrum. Those short wavelengths carry the energy that drives photochemical change, so a solution such as silver nitrate, which darkens as silver is set free, or iodine solution, which slowly loses strength, keeps far longer behind amber glass than in a clear bottle. The tint reduces light rather than stopping it, so stocks still belong in a closed cupboard.

The dropper itself works by simple pressure. Squeezing the teat pushes air out of the pipette; releasing it lowers the pressure inside and atmospheric pressure drives liquid up the glass. Gentle pressure on the teat then releases single drops at the tip.

Drops as a Unit of Volume

A drop leaves the tip when its weight overcomes the surface tension holding it to the rim, so drop size depends on the tip diameter, the angle at which the dropper is held and the liquid itself. Water forms larger drops than alcohol from the same tip because its surface tension is higher. For any work that counts drops, the brown glass dropper should be calibrated by counting how many drops fill a measured volume, held vertically each time.

That calibration is the first step of the oil-film experiment for estimating the size of a molecule, where one drop of a very dilute oleic acid solution spreads on a water surface dusted with fine powder and the area of the film is measured.

Applications

  • Keeping working stocks of light-sensitive reagents at each bench
  • Adding indicator solution drop by drop during titrations and pH tests
  • Delivering a single drop of dilute oleic acid solution in the oil-film estimate of molecular size
  • Calibrating drop volume by counting drops into a measuring cylinder
  • Dispensing stains and test reagents in small, controlled amounts

Specifications

Glass colour Brown (amber)
Usual form Dropper bottle with glass pipette and rubber teat
Purpose of tint Reduces ultraviolet and short-wavelength light reaching the contents
Typical contents Indicators, iodine, silver nitrate and other light-sensitive reagents
Capacity, and bottle with dropper or dropper alone Confirm at enquiry

Care & Handling

  • Label each bottle with its contents and the date; the brown glass hides the colour of the liquid.
  • Hold the pipette tip downward when it is out of the bottle so liquid does not run back into the teat.
  • Replace teats that are cracked, sticky or swollen, since they leak and can contaminate the solution.
  • Wash the pipette and bottle separately and rinse with distilled water before refilling with a different solution.

Why Choose LabEquip

Schools and college laboratories buy brown glass droppers in sets, one per reagent and bench, so that light-sensitive solutions stay usable through a term. LabEquip lists them with its physics equipment and can supply matching stock bottles such as amber narrow-mouth reagent bottles; quantities can be discussed on the contact page.

Frequently Asked Questions

Why are some solutions kept in brown glass?

Amber glass absorbs ultraviolet and much of the blue end of visible light. Solutions that decompose in light, such as silver nitrate, iodine and hydrogen peroxide, keep longer in it than in clear glass.

Does a brown bottle make a solution completely light-proof?

No. It cuts most of the light that drives photochemical change but still lets some through, so light-sensitive stocks should also be stored in a closed cupboard away from sunlight.

How do I find the volume of one drop?

Count the drops needed to fill a small measuring cylinder to a marked volume and divide the volume by the count. Keep the dropper vertical and use the same liquid, because drop size changes with tip angle and with the liquid.

Why do drops of different liquids have different sizes?

A drop falls when its weight overcomes the surface tension holding it to the tip. Liquids with lower surface tension, such as alcohol, therefore form smaller drops than water from the same dropper.

Can the dropper hold strong acids or organic solvents?

The glass resists most laboratory chemicals, but rubber teats can swell or perish in organic solvents and concentrated acids. For those liquids use a teat of a resistant material or a separate glass pipette.

Is the dropper supplied with its bottle?

The usual brown glass dropper is a small amber bottle with a pipette and teat built into the cap. Bottle capacity, and whether a complete bottle or the dropper alone is needed, can be agreed through the contact page.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)