Search

In Stock

BOILING FLASK WITH FLAT BOTTOM

Flat-Bottom Stability Design: Enables direct placement on benches or hot plates without external support.

Borosilicate Glass Construction: Offers high resistance to heat, chemicals, and thermal shock during repeated laboratory use.

$2.88

Quick Answer: The Boiling Flask with Flat Bottom is a glass flask with a spherical body, a long neck and a flattened base, so it stands upright on a bench or a tripod and gauze. In the physics laboratory a flat bottom boiling flask is used to heat and boil water, to generate steam for heat practicals, and to show convection and the expansion of liquids.

Flat Base Compared With Round

The flat base is the practical advantage: the flask stands by itself while it is filled, and it sits squarely on a wire gauze over a burner without a ring or clamp to hold it upright. The cost of that convenience is strength. A sphere spreads stress evenly over its whole surface, while the flat base and the sharper curve where it meets the body concentrate stress. For that reason a flat bottom flask is used for open heating at atmospheric pressure and is not used under vacuum or for the cooling-and-sealing demonstrations that suit a round bottom flask.

Boiling flasks are usually made of borosilicate glass, valued for its low thermal expansion and resistance to heat shock; the glass type of a particular order should be confirmed before it is heated strongly.

Two Classic Demonstrations

Convection in water: fill the flask with cold water, let it settle, and drop a single crystal of potassium permanganate down a tube so it rests at one side of the base. Heating gently beneath that side sends a purple stream rising above the crystal, across the top and down the cooler side, tracing the convection current.

Expansion of a liquid: fill the flask to the brim with coloured water and fit a one-hole stopper carrying a narrow glass tube. When the flask is put into hot water the level in the tube first dips slightly, as the glass expands before the heat reaches the water, then rises steadily as the water expands more than the glass.

Specifications

Form Spherical body, long neck, flattened base
Glass Usually borosilicate
Heating Open heating on a tripod and wire gauze or a hot plate
Not intended for Vacuum or reduced-pressure work
Capacity and neck finish Confirm at enquiry

Applications

  • Boiling water and producing steam for heat practicals
  • Showing convection currents in water with a permanganate crystal
  • Demonstrating the expansion of liquids with a stopper and narrow tube
  • Warming liquids that must stand unsupported on the bench between steps

Care & Handling

  • Inspect for cracks, scratches and star marks before every heating; discard any flask that shows them.
  • Heat through a wire gauze, never in a bare flame, and do not heat the flask when empty.
  • Add a few anti-bumping granules before boiling water, and never stopper a flask that is being heated.
  • Let the flask cool in air before washing; cold water on hot glass can crack it.

Why Choose LabEquip

School heat practicals and chemistry benches both use flat bottom flasks, so laboratories usually order them together with tripods and gauzes. LabEquip lists them among its physics equipment next to the round bottom version, and capacities for a class set can be arranged through the contact page.

Frequently Asked Questions

What is the difference between a flat bottom and a round bottom flask?

A flat bottom flask stands by itself and sits directly on a gauze. A round bottom flask needs a ring, cork stand or clamp, but its even curvature makes it stronger under heat and pressure differences.

Can a flat bottom flask be used under vacuum?

No. The flat base concentrates stress, so reduced-pressure work, including sealing a flask of steam and cooling it, should be done only in a round bottom flask.

Why do anti-bumping granules help when boiling water?

Granules provide small points where bubbles of steam can form steadily. Without them, water can overheat and then boil in a sudden burst that throws hot water out of the neck.

Why does the liquid level dip first in the expansion experiment?

Heat reaches the glass before the liquid. The flask expands slightly and its volume increases, so the level in the tube falls a little until the warmed liquid starts to expand faster than the glass.

Can the flask be heated on an electric hot plate?

Yes, if the hot plate is level and the flask sits fully on it. Start at a low setting and raise it gradually, because rapid heating of thick glass can crack it.

How do I clean a flask with deposits from hard water?

Rinse it with dilute acid such as vinegar or dilute hydrochloric acid to dissolve the scale, then wash with detergent and rinse with distilled water. Use a soft flask brush, as hard brushes scratch the glass.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)