Search

In Stock

BOILING FLASK ROUND BOTTOM

Round-Bottom Geometry: Enhances heat uniformity and reduces thermal stress during heating operations.

Heat-Resistant Borosilicate Glass: Provides high chemical durability and resistance to thermal shock.

$2.71

Quick Answer: The Boiling Flask Round Bottom is a round bottom flask: a fully spherical glass body with a narrow neck, designed for even heating and for withstanding pressure differences. Physics teachers use it to generate steam, to show water boiling under reduced pressure, and to demonstrate the expansion of air.

Why a Sphere Is Used

A spherical vessel spreads stress evenly over its whole wall, with no flat areas or sharp corners where cracks can start. That makes it the right choice whenever the inside and outside pressures differ, and it also heats evenly in a heating mantle or water bath. The price of the shape is that it cannot stand alone: it needs a cork ring, a retort ring with gauze, or a three-finger clamp on the neck.

Laboratory boiling flasks are generally borosilicate glass, which tolerates heating well; check the glass type of a given order before heating it strongly.

Franklin’s Experiment: Boiling at Reduced Pressure

Boil a little water in the flask for a minute so steam drives out most of the air, remove the heat, and immediately close the neck with a well-fitting stopper. Turn the flask upside down in a clamp and pour cold water over its upper surface. The water inside starts boiling again, though it is cooling. The cold water condenses steam inside, the pressure above the water falls, and at that lower pressure the boiling point drops below the water’s present temperature.

Only a flask free from scratches or chips should be used for this, with eye protection worn and students standing back, because the flask is under reduced pressure throughout.

Physics Uses

  • Franklin’s demonstration of boiling at reduced pressure
  • Generating steam for latent heat and expansion experiments
  • Showing the expansion of air with a stopper, tube and coloured water, as in an air thermometer
  • Even heating of liquids in a heating mantle or water bath

Specifications

Form Spherical body with narrow neck
Glass Generally borosilicate
Support Cork ring, retort ring with gauze, or clamp on the neck
Heating Heating mantle, water bath, or flame through gauze
Capacity and neck type Confirm at enquiry

Care & Handling

  • Check the flask for scratches, chips and star cracks before any heating or pressure work.
  • Support it in a cork ring or clamp at all times; a round flask rolls off a bench easily.
  • Never heat a stoppered flask; only stopper it after the heat is removed in the reduced-pressure demonstration.
  • Cool gradually in air before washing, and clean with a soft brush that will not scratch the glass.

Why Choose LabEquip

Physics and chemistry departments order these spherical flasks together with clamps and cork rings, since the same flask serves steam generation and the reduced-pressure demonstration. LabEquip supplies them with its physics lab equipment range, next to the flat bottom version, and capacities can be agreed through the contact page.

Frequently Asked Questions

Why is a round bottom flask used for the reduced-pressure demonstration?

Its spherical wall spreads the stress of the pressure difference evenly. A flat bottom flask concentrates stress at the base and could implode when the inside pressure falls.

Why does the water boil again when cold water is poured over the flask?

The cold water condenses steam inside the sealed flask, lowering the pressure above the liquid. Boiling point falls with pressure, so the water boils at a temperature below 100 degrees Celsius.

How should a round bottom flask be supported?

Stand it on a cork ring when not heating, and clamp it at the neck with a padded clamp during heating. For heating over a flame, rest it on a gauze with a retort ring and still clamp the neck.

Can the flask be heated directly in a flame?

Use a wire gauze between the flame and the glass, or heat in a mantle or water bath. A bare flame produces a hot spot that strains the glass.

How does the flask show the expansion of air?

Fit a stopper with a glass tube dipping into coloured water and warm the flask with your hands. Bubbles leave the tube as the air expands; on cooling, the coloured water is drawn up the tube.

What should be done with a flask that has a small chip at the neck?

Do not use it for heating or pressure work. A chip or star crack is where failure starts; mark it for disposal or for cold, non-pressure tasks only.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)