Search

In Stock

Balmer Series and Rydberg Constant

TP Série Balmer et constante de Rydberg, High-Purity Hydrogen Spectral Discharge Tube Facilitates student Analysis of discrete energy levels and electronic transitions within the Bohr model, supporting Advanced Quantum Physics Module 302.

Factory-Calibrated 600 lines/mm Diffraction Grating enables precise Evaluation of wavelength displacement and the subsequent mathematical derivation of the Rydberg Constant.

Integrated High-Voltage Safety Shroud Supports the safe Application of spectroscopic protocols in high-cadence undergraduate research environments.

Adjustable Precision Slit Assembly Enhances student Observation of spectral line resolution and fine structure, minimizing measurement uncertainty.

$291.02

Quick Answer: The Balmer series and Rydberg constant experiment measures the wavelengths of the visible lines emitted by hydrogen gas and uses them to calculate the Rydberg constant. It links an optical measurement made with a diffraction grating to the energy levels of the hydrogen atom.

From Hydrogen Lines to Energy Levels

When an electric discharge excites hydrogen, electrons in the atoms are lifted to higher energy levels and then fall back. Transitions that end on the second level (n = 2) form the Balmer series, and its first members lie in the visible spectrum: a red line (H-alpha), a blue-green line (H-beta) and violet lines (H-gamma and H-delta). Each wavelength obeys the Rydberg formula 1/λ = R(1/2² − 1/n²), where n is the upper level and R the Rydberg constant.

Plotting 1/λ against 1/n² for the measured lines gives a straight line with gradient −R and intercept R/4. Getting both values from one graph, and checking that they agree, is a strong test that each line has been assigned the right value of n. The accepted value of R for hydrogen is about 1.097 × 10⁷ per metre.

Measuring the Wavelengths

In the usual arrangement the light of a hydrogen spectral lamp passes through a slit and then a transmission diffraction grating, and the angle at which each coloured line appears is measured. With the grating spacing d known, each wavelength follows from d sin θ = mλ. Measuring each line on both sides of the central image and averaging the two angles removes the error caused by a grating that is not quite square to the beam.

The red line is bright and easy to locate, while the violet lines are faint, so the room should be darkened and students given time for their eyes to adapt. Reading the second-order spectrum, where the lines are spread further apart, improves the precision for the brighter lines.

Specifications

Experiment Balmer series of hydrogen and determination of the Rydberg constant
Light source Hydrogen spectral (discharge) lamp
Dispersing element Diffraction grating in the usual arrangement, with angles read on a scale or goniometer
Key relations 1/λ = R(1/2² − 1/n²) and d sin θ = mλ
Exact component list and lamp supply Confirm at enquiry

Where the Experiment Is Used

  • Undergraduate atomic physics practicals on the hydrogen spectrum
  • Testing the Bohr model by comparing measured and predicted wavelengths
  • Practising grating spectroscopy and careful angle measurement
  • Introducing quantised energy levels with a visible, colourful result

Care & Handling

  • Let the hydrogen lamp cool before handling it, as discharge tubes run hot
  • Keep fingers off the grating surface and hold it by its edges or frame
  • Avoid staring at the lamp from close range for long periods; observe through the instrument
  • Treat the lamp supply as a high-voltage device and switch it off before adjusting the lamp

Why Choose LabEquip

University and college physics laboratories buy the Balmer series and Rydberg constant set for their atomic physics rotation, often next to the Zeeman effect experiment and the Franck-Hertz experiment. Contact LabEquip to check the components and lamp supply arrangement before ordering.

Frequently Asked Questions

Why are only four or so Balmer lines visible?

The higher members of the series crowd together towards the violet and ultraviolet, and they are also much fainter. In a classroom the red, blue-green and one or two violet lines are normally all that can be seen by eye.

How is the Rydberg constant obtained from the measurements?

Each measured wavelength is converted to 1/λ and plotted against 1/n², with n = 3 for the red line, 4 for the blue-green line and so on. The gradient of the straight line is −R, and the intercept should equal R/4.

Why measure angles on both sides of the centre?

If the grating is slightly rotated, the angle on one side is too large and on the other too small. Averaging the left and right readings cancels most of that error and gives a more reliable wavelength.

Does the experiment need a dark room?

A darkened room helps a great deal, because the violet lines are faint. Students should wait a minute for their eyes to adjust before trying to locate them.

Is the hydrogen lamp safe to use?

The lamp is a sealed tube, but its supply works at high voltage and the tube becomes hot. Switch off before touching the lamp, let it cool, and follow the instructions supplied with the lamp housing.

What does the result show about atomic structure?

A single constant reproducing every line wavelength shows that hydrogen has fixed energy levels. It was one of the key results behind the Bohr model and, later, quantum mechanics.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)