Search

In Stock

Automatic Seed Counter

High-Speed Counting Mechanism: Capable of processing hundreds of seeds per minute with adjustable settings for various seed sizes.

Precision Calibration System: Integrated sensors and calibration tools ensure consistent accuracy across repeated counting cycles.

₹6,200.00

Quick Answer: The Automatic Seed Counter is an electric bench instrument that feeds seeds one at a time past a sensor and counts them, usually stopping at a preset number. An automatic seed counter replaces slow hand counting in germination tests, seed-weight determinations and sowing trials in agriculture, botany and seed-testing laboratories.

How Electronic Seed Counting Works

In the most common design, seeds are tipped into a bowl or hopper that vibrates, moving them up a spiral track or along a channel so they leave the outlet in single file. Each seed falls through a light beam on its way out and briefly interrupts it; a photoelectric sensor registers each interruption as one count. The display shows the running total, and when the preset number is reached the feed stops so the batch can be collected. Whether a given model uses this vibratory principle or another feed, and how its settings are adjusted, should be checked with the supplier.

Counting accuracy depends on the seeds leaving in single file. Very small, flat, hairy or sticky seeds can travel in pairs or bridge the outlet, so feed speed is turned down for them, and a hand count of a sample batch is a sensible check when changing to a new kind of seed.

Why Counted Batches Matter

A germination test is only as good as its count: the percentage is the number germinated divided by the number sown, so every batch must start with exactly the intended number. The same is true when finding the weight of a thousand seeds, a standard way of comparing seed size between lots, or when setting out equal seed numbers in plot or pot trials. Counting hundreds of seeds by hand is slow and error-prone; a counter makes replicate batches quick and consistent.

Laboratory Uses

  • Preparing equal-numbered replicates for germination tests
  • Counting out a thousand seeds for seed-weight determination
  • Setting out equal seed numbers for pot, tray and field trials
  • Practical classes in seed science and agronomy

Specifications

Type Electric automatic seed counter
Feed Single-file feed to the counting outlet (vibratory in the usual design)
Detection Optical sensor counting each passing seed (usual design)
Batch function Preset count that stops the feed (usual design)
Seed size range, feed method and power supply Confirm at enquiry

Care & Handling

  • Place the counter on a firm, level bench where vibration from other equipment does not disturb the feed.
  • Clear dust and seed fragments from the outlet and sensor window regularly; dirt causes miscounts.
  • Check the count against a hand count when changing to a different kind of seed.
  • Switch off and unplug before cleaning, and keep liquids away from the instrument.

Why Choose LabEquip

Agricultural colleges, botany departments and seed-testing laboratories buy seed counters to save hours of hand counting in germination work. LabEquip lists it among its physics equipment, and seed types, batch sizes and power requirements can be discussed through the contact page before ordering.

Frequently Asked Questions

How does an automatic seed counter count the seeds?

In the usual design, seeds are fed in single file through a light beam. Each seed interrupts the beam briefly, and the sensor records each interruption as one count.

Can it count very small seeds?

Many counters handle small seeds at a reduced feed speed, but very fine or dust-like seeds may need a special setting or plate. Run a check batch against a hand count for any new seed type.

Why does a counter sometimes count two seeds as one?

If two seeds pass the sensor touching each other, they interrupt the beam once. Slowing the feed spaces the seeds out and removes most of these errors.

What is the thousand-seed weight used for?

It compares seed size between lots and helps set sowing rates by weight. The counter counts out exactly one thousand seeds, which are then weighed on a balance.

Does the counter damage seeds?

Vibratory feeding, the usual method, is gentle and normally does not harm seeds intended for germination. Very fragile seeds should still be fed at a low speed.

How should the counter be cleaned between seed lots?

Empty the bowl completely, brush out the track and outlet, and wipe the sensor window. Leftover seeds from one lot can contaminate the next batch.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)