Search

In Stock

Air Pump (Vacuum Pump with Aluminium Plate)

Precision-Machined Interface: Features a heavy-duty cast aluminium base with a 250mm diameter ground surface and a non-reactive rubber gasket to ensure an airtight seal during high-vacuum operations.

High-Efficiency Rotary Vane: Equipped with an oil-sealed pump mechanism and a dual-scale pressure gauge, allowing for rapid evacuation and precise monitoring of internal atmospheric conditions.

₹1,670.00

Quick Answer: The Air Pump (Vacuum Pump with Aluminium Plate) is a school air-exhaust pump fitted with a flat aluminium pump plate, on which a bell jar is set and evacuated. This vacuum pump with aluminium plate is used for classic demonstrations of air pressure and of the need for a medium to carry sound.

How the Pump Plate and Bell Jar Work Together

The aluminium plate is the working surface: a flat, smooth disc with an air port at its centre connected to the pump. A bell jar with a ground or flanged rim is set on the plate, the rim is smeared with vacuum grease, and the pump draws air out through the central port. As the pressure inside falls, the atmosphere pressing on the outside of the jar seals it firmly against the plate.

An exhaust pump removes a fraction of the remaining air with each cycle, so the pressure falls quickly at first and then more slowly. A school pump therefore gives a partial vacuum, ample for demonstrations, rather than the near-perfect vacuum of research equipment. A non-return valve stops air flowing back between strokes, and a release valve or screw lets air back in at the end of the demonstration.

The pump and plate are the base for the bell in bell jar apparatus and can evacuate Magdeburg hemispheres through a length of thick-walled vacuum tubing. School pumps of this pattern are typically hand-operated, with a single barrel on a base, a stopcock to isolate the jar and an air-inlet screw for releasing the vacuum. The plate diameter and whether a bell jar is included are not stated in the title, and they decide which jars fit.

Specifications

Type Air exhaust (vacuum) pump with pump plate
Plate material Aluminium, as titled
Seal Bell jar rim on a greased, flat plate surface
Usual drive Hand-operated barrel pump with stopcock and release screw
Typical accessories Bell jar, electric bell assembly, thick-walled connecting tubing
Plate diameter and items included Confirm at enquiry

Demonstrations

  • Showing that sound cannot travel through a vacuum with a bell inside the jar
  • Making a partly inflated balloon swell as the surrounding pressure falls
  • Showing that warm water boils when the pressure above it is reduced
  • Evacuating Magdeburg hemispheres to show the force of atmospheric pressure

Care & Handling

  • Keep the plate face free of scratches and grit; a scratch across the face lets air leak under the jar rim.
  • Use a thin, even film of vacuum grease and wipe away the excess after use.
  • Inspect glass bell jars for cracks or chips before every evacuation and keep a safety screen between the jar and the class.
  • Let air back in slowly through the release valve; never try to lift the jar while it is under vacuum.
  • Keep liquids well below the plate port so that water is not drawn into the pump.

Why Choose LabEquip

Schools equipping a physics demonstration bench buy an air pump and plate once and return to them across many air-pressure and sound lessons. LabEquip lists the pump in Physics Equipments; contact our team to match the plate to bell jars you already own.

Frequently Asked Questions

Why is the pump plate made of aluminium?

Aluminium is light, does not rust and can be machined to a flat, smooth face. Flatness matters most, because the bell jar seals only where its rim meets the plate evenly all round.

What grease should be used on the bell jar rim?

Use a vacuum grease or a heavy silicone grease applied as a thin, continuous film. Petroleum jelly can work for school demonstrations but softens when warm and collects dust, so wipe it off after each use.

How good a vacuum does a school air pump produce?

It produces a partial vacuum, enough to make sound fade, balloons swell and warm water boil without further heating. Each pumping cycle removes only a fraction of the remaining air, so the pressure never reaches zero.

Is it safe to evacuate a glass bell jar?

Only if the jar is free of cracks, chips and deep scratches. A damaged jar can implode under atmospheric pressure, so inspect it first and keep a safety screen between the jar and the class during demonstrations.

Why does the bell jar become hard to lift during the demonstration?

With air removed from inside, the atmosphere pushes down on the outside of the jar with no matching push from within. The jar stays clamped to the plate until air is let back in through the release valve.

Which demonstrations need accessories beyond the pump and plate?

The sound demonstration needs a bell jar and a bell assembly with leads through the plate or jar, and Magdeburg hemispheres need a tube connection to the pump. Tell us which experiments you plan so the right jar and fittings can be matched to this plate.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)