Search

In Stock

Air Blower

Consistent airflow output with stable motor assembly, enabling repeatable experimental conditions

Rugged insulated housing with laboratory-grade electrical components, built for continuous instructional use

$8.46

Quick Answer: The Air Blower is an electric laboratory air blower that delivers a steady stream of air for physics demonstrations and experiments. A laboratory air blower supplies air to air tracks and hover demonstrations, drives Bernoulli and lift experiments, and provides a controlled airflow for measurements with an anemometer.

What the Blower Is Used For

Many airflow experiments need more air than a person can provide and need it steadily. A motor-driven blower moves a large volume of air at a modest pressure, which is exactly what an air track needs to float its gliders and what a hovercraft model needs to lift. Directed through a nozzle, the same stream becomes a jet for the classic Bernoulli demonstrations.

The most familiar of these is the floating ball: a light ball placed in an upward air jet hovers in it, and even with the jet tilted it stays put. Air moving fast around the ball has a lower pressure than the still air outside the jet, so whenever the ball drifts towards the edge it is pushed back into the centre. Blowing across the top of a curved paper strip, or over a model wing, shows lift by the same reasoning.

Measuring and Controlling the Airflow

Pairing the blower with an anemometer turns demonstrations into measurements. Students can map how the air speed falls with distance from the outlet, compare speeds at different settings if the blower has speed control, and calculate a volume flow rate by multiplying the average speed by the outlet area. Whether this blower has speed control, a heater, or fittings for a hose should be confirmed before ordering, so it can be matched to the apparatus it will drive.

Demonstrations and Experiments

  • Supplying air to an air track or hover-puck demonstration
  • Floating a light ball in an air jet to show the Bernoulli effect
  • Demonstrating lift over a curved strip or model wing
  • Providing airflow for Bernoulli tube and pressure experiments
  • Producing a known airflow for anemometer practice

Specifications

Type Electric air blower for laboratory use
Output Steady stream of air from an outlet nozzle
Typical uses Air tracks, Bernoulli demonstrations, airflow measurement
Measured with Anemometer at the outlet
Speed control, hose fitting and power rating Confirm at enquiry

Care & Handling

  • Keep the air inlet clear and free of paper, dust and loose cloth.
  • Check the cable and plug before use and keep the blower away from water.
  • Do not point the air stream at faces, and let the motor rest if the casing becomes hot.
  • Clean dust from the inlet grille with the blower switched off and unplugged.

Why Choose LabEquip

Physics departments buy a laboratory air blower to drive air tracks and to run fluid-flow demonstrations from one source. LabEquip lists it among its physics equipment, and compatibility with existing apparatus can be checked through the contact page.

Frequently Asked Questions

Why does a ball float steadily in the air jet?

Fast-moving air around the ball has a lower pressure than the still air outside the jet. If the ball drifts sideways, the higher outside pressure pushes it back into the stream.

Can the blower run an air track?

Yes, provided it delivers enough air for the track’s length and its outlet can be connected to the track’s inlet. Check the hose fitting and airflow before relying on it.

How is volume flow rate found from the blower?

Measure the air speed at several points across the outlet with an anemometer, take the average and multiply by the area of the outlet. The result is the volume of air delivered per second.

Does the blower produce hot air?

That depends on the model; some blowers have a heater and others move room-temperature air only. Confirm before using it near materials that could be affected by heat.

Why does air speed fall with distance from the outlet?

The jet spreads out and mixes with surrounding still air, sharing its momentum with more air. The speed at the centre of the jet therefore drops as the distance increases.

Is the blower safe for students to use?

Yes, under supervision: keep the inlet clear, keep it away from water, and never aim the air stream at anyone’s face or eyes.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)