Search

In Stock

Aerodynamics Model

Maquette aérodynamisme, Integrated Multi-Port Pressure Tappings Supports the Application of Bernoulli’s equation and the empirical mapping of pressure coefficients across curved surfaces.

High-Contrast Streamline Visualization Tools allow for the visual Observation of laminar versus turbulent flow transitions, reinforcing evidentiary-grade laboratory reporting.

₹13,420.00

Quick Answer: The aerodynamics model is a teaching apparatus that places shaped bodies, such as a wing section, in a stream of air so that the lift and drag forces on them can be observed and compared. It is used to explain how wings fly and why streamlined shapes meet less resistance.

Lift: Turning the Airflow

A wing produces lift by turning the air that passes it downwards; by Newton’s third law the air pushes the wing upwards. The same effect shows up as a pressure difference: air passing over the curved upper surface moves faster and its pressure falls below the pressure under the wing. Tilting the wing to a larger angle of attack increases the lift, roughly in proportion at small angles.

The increase does not go on for ever. Beyond a critical angle, for many wing sections somewhere around 15 degrees, the air can no longer follow the upper surface and breaks away from it. This is the stall: lift falls suddenly and drag rises, which the aerodynamics model can show by tilting a wing section step by step.

Drag and Streamlining

Both forces follow the same pattern, L = ½ρv²C_L A and D = ½ρv²C_D A, so they grow with the square of the air speed; doubling the speed quadruples the force. The coefficients C_L and C_D carry the effect of shape and angle, which is what the model lets students compare.

A flat plate facing the flow leaves a wide, turbulent wake of low pressure behind it and has a high drag. A sphere or cylinder does better, and a streamlined teardrop shape of the same frontal area can have a drag coefficient a tenth or less of the plate’s, because the air closes in smoothly behind it. Cars, cycling helmets and the tails of fish all follow the same rule.

Applications

  • Showing how lift changes with angle of attack, and the stall
  • Comparing drag on a flat plate, a sphere and a streamlined body
  • Demonstrating that forces grow with the square of the air speed
  • Linking classroom physics to aircraft, cars and sports equipment

Specifications

Product Aerodynamics teaching model
Forces studied Lift and drag on bodies in an air stream
Key variables Shape, angle of attack and air speed
Force relations L = ½ρv²C_L A; D = ½ρv²C_D A
Profiles supplied, air source and force measurement Confirm at enquiry

Care & Handling

  • Mount each profile firmly before switching on the air stream
  • Keep fingers, hair and loose paper away from any fan or blower inlet
  • Switch off and unplug the air source before changing profiles
  • Store profiles flat so thin trailing edges are not bent

Why Choose LabEquip

Physics and engineering teachers use the aerodynamics model to connect fluid principles to flight, vehicles and sport in a way students can watch. Pair it with the Venturi and Pitot tube model for measuring air speed; contact LabEquip to confirm profiles and air source, or browse more physics lab equipment.

Frequently Asked Questions

What makes a wing produce lift?

The wing turns the passing air downwards, and the air pushes back on the wing with an upward force. The same effect appears as lower pressure over the upper surface, where the air moves faster, than under the lower surface.

What is the angle of attack?

The angle between the wing’s chord line and the oncoming air. Increasing it increases lift up to a point, after which the flow breaks away from the upper surface.

What happens when a wing stalls?

The airflow separates from the upper surface, lift falls suddenly and drag rises. For many wing sections this happens somewhere around 15 degrees, depending on shape and air speed.

Why does doubling the air speed quadruple the forces?

Lift and drag both depend on the dynamic pressure, half the air density times the speed squared, so twice the speed gives four times the force for the same shape and angle.

Why is a streamlined shape better than a flat plate?

Air follows a streamlined body smoothly and closes in behind it, leaving a narrow wake. A flat plate facing the flow leaves a wide, turbulent wake of low pressure behind it, which holds the plate back.

How is the air stream produced?

The air source and the way forces are measured can be confirmed at enquiry. A steady, uniform stream matters more than a strong one, because gusts make the readings hard to compare.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)