Search

In Stock

BANANA 4MM PLUG CONNECTORS

Standard 4 mm diameter plug interface, compatible with laboratory power supplies and meters

Low-resistance metal contact with insulated housing, ensuring stable electrical continuity and user safety

$1.80

Quick Answer: Banana 4mm plug connectors are 4 mm banana plugs, the connectors that fit the 4 mm sockets used on laboratory meters, power supplies and component boards. Fitted to the ends of flexible wire, these banana 4mm plug connectors make test leads that push in firmly and pull out without tools.

How a 4 mm Banana Plug Makes Contact

The name comes from the shape of the contact. The pin carries a sprung metal section that bulges slightly, like the curve of a banana, so that when it is pushed into a 4 mm socket the springs press outward against the socket wall. That pressure gives a reliable, low-resistance connection that holds the lead in place yet releases with a straight pull.

The 4 mm size is long established on laboratory and educational equipment, so the same leads connect a power supply to a resistance box, a rheostat to an ammeter and a circuit board to a voltmeter. Making leads in-house from plugs and flexible wire lets a department choose lengths and colours, repair damaged leads instead of discarding them, and keep a consistent colour code, usually red for positive and black for negative.

The wire is attached at the back of the plug, typically under a small screw or by soldering, and a sleeve or body covers the joint. Some designs also have a cross-hole or rear socket so another plug can be stacked on top, which helps when several leads meet at one terminal. Open plugs of this kind are meant for low-voltage work; shrouded safety leads are used where higher voltages are present.

Specifications

Connector Banana plug
Size 4 mm, as titled
Contact Sprung pin that grips the inside of a 4 mm socket
Use Ends of flexible test leads for laboratory equipment
Wire attachment, colours and pack quantity Confirm at enquiry

Care & Handling

  • Insert and remove the plugs by gripping the body, not by pulling on the wire.
  • Use them on low-voltage circuits; for higher voltages, shrouded safety leads are the correct choice.
  • Check the screw or solder joint inside each plug from time to time, and re-make any lead whose connection has loosened.
  • If a plug becomes loose in sockets, gently ease the spring outward or replace the plug.

Applications

  • Making red and black test leads for meters and power supplies
  • Connecting resistance boxes, rheostats and circuit boards that have 4 mm sockets
  • Repairing worn or broken laboratory leads by replacing the plugs
  • Building patch leads of custom length for demonstration circuits
  • Linking project boards and kits to laboratory power supplies

Why Choose LabEquip

Departments that put together electricity experiment kits for schools buy 4 mm plugs in bulk to make and repair leads. They connect instruments such as the digital multimeter and other items in LabEquip’s physics lab equipment that carry 4 mm sockets. Ask about colours and quantities through the contact page.

Frequently Asked Questions

Why is it called a banana plug?

The sprung part of the pin bulges slightly along its length, a shape likened to a banana. The bulge presses against the inside of the socket, which keeps the connection tight.

What does 4 mm refer to?

It is the nominal diameter of the pin and of the matching socket. The 4 mm size is widely used on laboratory meters, power supplies and educational components, so plugs of this size fit most school equipment.

How is the wire attached to the plug?

Usually the stripped end of the wire is clamped under a small screw or soldered into the back of the plug, then covered by the body or a sleeve. Twist the strands together and make sure no loose strands touch the outside.

Can these plugs be used on high-voltage equipment?

Standard open banana plugs are intended for low-voltage circuits. Equipment with higher voltages uses shrouded safety plugs and sockets that prevent fingers touching live metal, so check what the equipment requires.

Why use red and black plugs?

Colour coding shows polarity at a glance: red for the positive side and black for the negative. It reduces wiring mistakes, especially when connecting meters that must be connected the right way round.

What can be done if a plug feels loose in a socket?

The spring may have been flattened by long use. On many designs it can be eased outward slightly with care; otherwise replace the plug, since a loose contact adds resistance and makes readings jump.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)