Quick Answer: The Shop/Field Microscope is a compact, portable microscope that is taken to the workpiece, on the shop floor or at a site, rather than bringing a sample to the laboratory. A shop/field microscope is used to inspect surfaces, cracks, wear marks and small features on parts and structures in place.
Inspection Where the Part Is
Many parts are too large, too heavy or too valuable to cut up and carry to a bench microscope: a machine bed, a weld on a structure, a mould surface or a pipe. A portable inspection microscope is built to be set down on or held against such a surface, so the area of interest can be magnified in place. Typical checks include looking for fine cracks at welds, judging the finish of a machined or ground surface, and examining wear or corrosion pits.
Microscopes of this kind are often fitted with a measuring reticle, a scale in the eyepiece, so the width of a crack, the diameter of a hardness-test indentation or the size of a pit can be read directly. The listing does not state the magnification, reticle, lighting or power source of this model, so check that it matches the features you need to examine.
For bench measurement of small components, LabEquip lists the Tool Maker Microscope and the 300mm student profile projector.
Applications
- Checking welds and structural steel for surface cracks during inspection
- Reading hardness-test indentations on parts too big for a bench microscope, where a reticle is fitted
- Inspecting machined, ground or polished finishes on the shop floor
- Examining wear, pitting and corrosion on machinery during maintenance
Specifications
| Instrument | Portable shop/field inspection microscope |
| Portability | Carried to the workpiece rather than the workpiece to the lab |
| Use | Examining surfaces of parts and structures in place |
| Typical checks | Cracks, weld surfaces, finish, wear and corrosion |
| Magnification, reticle and lighting | Confirm at enquiry |
Care & Handling
- Keep the shop/field microscope in its case between sites, as knocks throw the optics out of line.
- Wipe the base or contact surface clean before placing it on a part, so grit does not scratch either surface.
- Clean oil mist and dust from the objective with lens tissue and a little lens cleaner.
- If the lighting runs on batteries, remove them before long storage.
Why Choose LabEquip
Maintenance engineers, welding inspection trainers and engineering colleges teaching non-destructive inspection buy portable microscopes of this kind. It is listed in the LabEquip Microscope & Optics range.
Frequently Asked Questions
What is a shop microscope?
It is a small, robust microscope designed to be used on the workshop floor or out in the field, placed directly on or against a part. It saves cutting samples from parts that cannot be moved to a laboratory.
Can it measure crack widths or indentations?
It can when a measuring reticle is fitted in the eyepiece: the feature is lined up with the scale and read off. Check the reticle against a stage micrometer for accurate readings.
How is it lit on site?
Portable inspection microscopes usually carry their own small lamp or LED so they work where room lighting is poor. Shade the area from strong sunlight, which washes out the image.
Is it suitable for metallurgical examination?
It can examine small spots that have been polished and etched on a large part, a technique known as in-situ metallography. For detailed microstructure work, a bench metallurgical microscope gives better optics.
How should it be carried?
In a padded case with the objective protected. Avoid leaving it in hot vehicles or damp site cabins, which harm lenses and any electronics.
What surface preparation is needed before inspection?
Clean away grease, paint and scale from the spot to be examined. For cracks, a light polish of the area makes fine lines far easier to see.
Last Updated: September 2026










Reviews
There are no reviews yet.