Search

In Stock

Shop/Field Microscope

Integrated Micrometer Reticle: Features a precision-etched internal measuring scale with 0.01mm increments, allowing for direct, real-time dimensional assessment of micro-fractures, thread pitches, and surface finish tolerances without external calibration.

Dynamic High-Intensity Oblique Illumination: Equipped with a variable-angle lighting system that provides high-contrast visualization of surface topologies and 3D textures, crucial for identifying metallurgical fatigue and conducting non-destructive material testing.

$27.18

Quick Answer: The Shop/Field Microscope is a compact, portable microscope that is taken to the workpiece, on the shop floor or at a site, rather than bringing a sample to the laboratory. A shop/field microscope is used to inspect surfaces, cracks, wear marks and small features on parts and structures in place.

Inspection Where the Part Is

Many parts are too large, too heavy or too valuable to cut up and carry to a bench microscope: a machine bed, a weld on a structure, a mould surface or a pipe. A portable inspection microscope is built to be set down on or held against such a surface, so the area of interest can be magnified in place. Typical checks include looking for fine cracks at welds, judging the finish of a machined or ground surface, and examining wear or corrosion pits.

Microscopes of this kind are often fitted with a measuring reticle, a scale in the eyepiece, so the width of a crack, the diameter of a hardness-test indentation or the size of a pit can be read directly. The listing does not state the magnification, reticle, lighting or power source of this model, so check that it matches the features you need to examine.

For bench measurement of small components, LabEquip lists the Tool Maker Microscope and the 300mm student profile projector.

Applications

  • Checking welds and structural steel for surface cracks during inspection
  • Reading hardness-test indentations on parts too big for a bench microscope, where a reticle is fitted
  • Inspecting machined, ground or polished finishes on the shop floor
  • Examining wear, pitting and corrosion on machinery during maintenance

Specifications

Instrument Portable shop/field inspection microscope
Portability Carried to the workpiece rather than the workpiece to the lab
Use Examining surfaces of parts and structures in place
Typical checks Cracks, weld surfaces, finish, wear and corrosion
Magnification, reticle and lighting Confirm at enquiry

Care & Handling

  • Keep the shop/field microscope in its case between sites, as knocks throw the optics out of line.
  • Wipe the base or contact surface clean before placing it on a part, so grit does not scratch either surface.
  • Clean oil mist and dust from the objective with lens tissue and a little lens cleaner.
  • If the lighting runs on batteries, remove them before long storage.

Why Choose LabEquip

Maintenance engineers, welding inspection trainers and engineering colleges teaching non-destructive inspection buy portable microscopes of this kind. It is listed in the LabEquip Microscope & Optics range.

Frequently Asked Questions

What is a shop microscope?

It is a small, robust microscope designed to be used on the workshop floor or out in the field, placed directly on or against a part. It saves cutting samples from parts that cannot be moved to a laboratory.

Can it measure crack widths or indentations?

It can when a measuring reticle is fitted in the eyepiece: the feature is lined up with the scale and read off. Check the reticle against a stage micrometer for accurate readings.

How is it lit on site?

Portable inspection microscopes usually carry their own small lamp or LED so they work where room lighting is poor. Shade the area from strong sunlight, which washes out the image.

Is it suitable for metallurgical examination?

It can examine small spots that have been polished and etched on a large part, a technique known as in-situ metallography. For detailed microstructure work, a bench metallurgical microscope gives better optics.

How should it be carried?

In a padded case with the objective protected. Avoid leaving it in hot vehicles or damp site cabins, which harm lenses and any electronics.

What surface preparation is needed before inspection?

Clean away grease, paint and scale from the spot to be examined. For cracks, a light polish of the area makes fine lines far easier to see.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)