Search

In Stock

Test Tube Stand (Three Tier), Polypropylene

Reinforced Polypropylene Composition: High-purity, medical-grade polymer provides exceptional resistance to acids, bases, and solvents while maintaining structural rigidity at 121°C sterilization temperatures.

Triple-Plate Alignment Matrix: Precision-molded three-tier architecture features concentric apertures to ensure vertical stability and prevent lateral tube movement during intensive pipetting or transport.

₹532.00

Quick Answer: Built from a light plastic that withstands most acids, alkalis and aqueous solutions, the Test Tube Stand (Three Tier), Polypropylene is a three-level polypropylene test tube stand for holding test tubes upright and grouped on the bench.

Why Polypropylene Suits a Busy Chemistry Bench

Polypropylene is the workhorse plastic of school laboratories. It resists most dilute and many concentrated acids, alkalis, salt solutions and alcohols, so a polypropylene rack can stand next to sodium hydroxide, ammonia solution and hydrochloric acid without clouding or cracking. It is also light and slightly flexible, which means a dropped rack usually bounces rather than shatters.

The three-level design keeps tubes upright in a compact footprint and lets students keep them grouped by step. In qualitative inorganic analysis, where one student may work through a dozen tubes in a single session, that organisation saves time and prevents mix-ups between the original solution and the tubes being tested.

Polypropylene has two limits worth knowing. It is usually translucent rather than glass-clear, so colour comparisons are easier in a transparent stand, and it softens far below the temperature of a tube taken from a Bunsen flame. Strong oxidising agents such as concentrated nitric acid and some hydrocarbon and chlorinated solvents also attack it.

Applications

  • Salt analysis and other qualitative tests using acids, alkalis and ammonia
  • Microbiology and biology practicals where the rack may need autoclaving, after checking its rating
  • Organising reagent tubes on shared benches in school and college labs
  • Keeping labelled sample tubes upright in a refrigerator

Specifications

Type Three tier test tube stand
Material Polypropylene (PP)
Chemical resistance (general PP) Good against most acids, alkalis, alcohols and aqueous solutions
Heat (general PP) Generally autoclavable at 121 °C; melts at about 160 °C
Not suitable for Tubes straight from a flame; concentrated oxidising acids

Care & Handling

  • Rinse off acid or alkali splashes at the end of each practical, then wash with ordinary lab detergent.
  • Confirm the item’s temperature rating before the first autoclave cycle, and let the rack cool inside the autoclave.
  • Stand freshly heated tubes in a metal rack until they cool.
  • Keep the stand out of strong sunlight for long periods, since ultraviolet light slowly makes polypropylene brittle.

Why Choose LabEquip

Chemistry departments usually choose the polypropylene stand for wet benches that see acids and alkalis every day, and keep the Test Tube Stand (Wire Pattern) nearby for tubes that have just been heated. Both belong to the Metalware category; lab-wise quantities can be sent through the contact page in a single list.

Frequently Asked Questions

What chemicals can a polypropylene test tube stand handle?

Polypropylene resists most acids and alkalis at the strengths used in school labs, salt solutions, ammonia solution and alcohols. It is attacked by strong oxidising acids such as concentrated nitric acid and swells in some hydrocarbon and chlorinated solvents.

Can the polypropylene stand be autoclaved?

Polypropylene is generally autoclavable at 121 °C, which is why it is common in microbiology labs. Check this stand’s rating before the first cycle and let it cool before handling, as PP is softer while hot.

Which stand suits salt analysis practicals?

A polypropylene stand, because salt analysis uses dilute acids, sodium hydroxide and ammonia solution, and polypropylene handles all of them. Transparent polycarbonate is attacked by ammonia and alkalis.

Can tubes heated over a burner be put straight into the stand?

No. A test tube taken from a Bunsen flame is far hotter than polypropylene can tolerate and will melt or distort the rack. Use a wire stand or a test tube holder until the tube cools.

Is the polypropylene stand transparent?

Polypropylene is usually translucent, so tubes are easy to locate but colours are not seen as clearly as through a polycarbonate or acrylic stand. For colour comparisons, hold a white card behind the tubes.

How should the stand be cleaned?

Rinse it with water after each practical, wash with a laboratory detergent and a soft brush, and leave it to drain upside down. Polypropylene tolerates most detergents, including mildly alkaline ones.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Bestsellers

Alcohol Spirit Lamp

Original price was: ₹90.00.Current price is: ₹35.00.
(0 Reviews)

Bunsen Burner Pair with Stop Cock

Original price was: ₹600.00.Current price is: ₹290.00.
(0 Reviews)

Laboratory Grade Brass Spirit Lamp

Original price was: ₹160.00.Current price is: ₹70.00.
(0 Reviews)

Universal Retort Stand

Original price was: ₹270.00.Current price is: ₹125.00.
(0 Reviews)

Bottle and Test Tube Cleaning Brush Set

Original price was: ₹200.00.Current price is: ₹90.00.
(0 Reviews)

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)