Adjustable Four Finger Clamp

The Adjustable Four Finger Clamp is a laboratory support tool used for gripping and positioning compatible glassware, tubes and apparatus during experimental procedures. Its four-finger configuration is intended for chemistry, physics, educational and research laboratories where equipment must be held securely on a suitable laboratory stand.

Product Description

The STEMAids Adjustable Four Finger Clamp provides multiple contact points around compatible laboratory apparatus. Its adjustable gripping configuration allows the clamp to accommodate laboratory items within its specified jaw range and position them for experiments, demonstrations and practical work.

The exact construction material, jaw-opening range, finger covering, adjustment mechanism, rod connection, maximum load and dimensions are . These specifications should be verified before describing the product as stainless steel, aluminium, chrome-plated, rubber-coated or heavy-duty. Explore related STEMAids physics laboratory equipment.

Key Features

• Four-finger gripping design: Provides multiple contact points for holding compatible laboratory vessels and apparatus.
• Adjustable clamping: Allows the gripping position to be adapted within the clamp’s verified operating range.
• Laboratory stand compatibility: Designed for use as part of a suitable stand-and-clamp support assembly.
• Controlled apparatus positioning: Helps hold laboratory components at the required height or orientation.
• Reusable laboratory accessory: Intended for repeated experimental setups when correctly maintained.
• Cross-disciplinary use: Applicable to compatible chemistry, physics and general science apparatus.
• Load specification: Jaw capacity, rod compatibility and maximum supported load are .

Technical Specifications

What’s Included in the Kit

• Adjustable Four Finger Clamp 
• Integrated adjustment mechanism 
• Boss head / stand connector 
• Protective packaging 

Applications / Uses

• Holding compatible laboratory flasks and tubes.
• Positioning glassware in experimental assemblies.
• Supporting chemistry apparatus during reactions or demonstrations.
• Securing components in physics laboratory setups.
• Holding compatible apparatus at selected heights or orientations.
• Teaching correct use of laboratory stands, clamps and support systems.

For complete support assemblies, browse STEMAids general physics laboratory items and complementary laboratory glassware.

How to Use the Adjustable Four Finger Clamp

1. Inspect the clamp, fingers, screws and gripping surfaces for damage or excessive wear.
2. Attach the clamp securely to a compatible support stand using the appropriate connector or boss head.
3. Open the four fingers sufficiently to accept the laboratory vessel or apparatus.
4. Position the item centrally within the gripping area.
5. Tighten the adjustment mechanism gradually until the apparatus is securely held.
6. Check the stand and clamp assembly for stability before starting the experiment.
7. Loosen the clamp carefully before removing the apparatus after use.

Safety note: Do not overtighten the clamp around glassware because excessive pressure can cause breakage. Confirm load capacity and jaw compatibility before supporting heavy, heated or fragile equipment.

Care & Maintenance

• Keep adjustment screws and gripping surfaces clean and free from chemical residues.
• Inspect fingers, coatings and threads regularly for wear, deformation or corrosion.
• Avoid excessive tightening that can damage the clamp or supported apparatus.
• Store the clamp clean and dry with other laboratory stand accessories.

Why Choose STEMAids

STEMAids is the STEM education brand of Eduscope Smart Learning Solutions Private Limited, a New Delhi-based manufacturer and supplier of laboratory and educational science products. STEMAids maintains an extensive physics laboratory equipment range covering experimental apparatus and supporting components. The company publishes ISO 9001:2015 quality-management credentials and maintains an active Importer-Exporter Code. These company credentials do not constitute a product-specific load or material certification for this clamp.

Frequently Asked Questions

What is an Adjustable Four Finger Clamp used for?

An Adjustable Four Finger Clamp is used to grip and position compatible laboratory glassware, tubes and apparatus on a laboratory support stand.

Why does this laboratory clamp have four fingers?

The four-finger arrangement provides multiple contact points around the supported apparatus. The exact jaw geometry and gripping range of this STEMAids model are .

What material is the STEMAids four finger clamp made from?

The exact material is . Steel, aluminium, alloy or a specific coating should not be stated until verified by STEMAids.

What size apparatus can this clamp hold?

The jaw-opening and compatible diameter range are . These values should be taken from the current product specification.

Can this clamp hold laboratory glassware during heating?

It may support compatible apparatus in heating setups when the clamp, stand and supported vessel are suitable for the procedure. Heat resistance and maximum load for this model are .

Is the Adjustable Four Finger Clamp ISO certified?

No dedicated product-specific ISO certification has been verified for this STEMAids laboratory clamp. Performance claims should be based on its confirmed material, jaw range and load specifications.