Quick Answer: The Universal Multi Rack 2 is a multi-faced plastic tube rack in which each face is drilled for a different tube size, typically from 0.5 ml and 1.5 ml microtubes up to 15 ml and 50 ml conical tubes, so one rack body covers most tube formats on the bench.
One Rack Body, Several Working Faces
Racks sold as universal multi racks generally follow the four-way pattern: a long block whose sides are each drilled for one tube format. To change format, the rack is lifted, turned onto another side and set down again, so the face needed, microtubes for PCR set-up or 15 ml and 50 ml tubes for sample preparation, is uppermost.
Compared with the Reversible Rack, which typically covers two microtube sizes, the universal pattern reaches up to the larger conical tubes as well. Compared with the Rotatable Multi Rack, it has no moving joint to clog or loosen: the whole block is turned by hand, which keeps it simple to wash, though the tubes on the working face must be removed before it is turned over.
For schools and colleges equipping many benches, one universal design can stand in for separate microtube and centrifuge-tube racks, which simplifies ordering and cupboard storage. Racks of this type are commonly polypropylene, a plastic that copes with water baths, disinfectant wipes and most aqueous reagents.
Applications
- Equipping student benches where both microtubes and centrifuge tubes are used in the same practical.
- Holding 15 ml and 50 ml tubes during cell harvesting or soil and food sample extraction.
- Holding microtubes for restriction digests and gel-loading preparation.
- Storing a set of labelled tubes upright in a refrigerator.
Care & Handling
- Empty the working face before turning the rack to another face.
- Scrub the holes with a soft brush during washing, since residue collects at the bottom of the deeper 50 ml wells.
- Keep the rack out of direct sunlight and away from heaters so the long body stays straight.
Specifications
| Type | Multi-faced (universal) tube rack |
| Material | Plastic; universal tube racks are commonly polypropylene |
| Tube formats | Typically 0.5 ml and 1.5 or 2.0 ml microtubes and 15 ml and 50 ml conical tubes, one size per face |
| How it is used | Turned by hand to bring the required face uppermost |
| Positions per face | To be confirmed at enquiry |
Why Choose LabEquip
Colleges, biotechnology departments and quality-control labs that use a mix of tube formats are the main buyers of the Universal Multi Rack 2, often ordering one per student pair. If tubes need to sit in a water bath, the float rack is the matching item; for a rack that turns instead of being flipped, see the Rotatable Multi Rack. The Lab Glassware section lists more, and quantities can be discussed through our contact page.
Frequently Asked Questions
What does universal mean in the name of this rack?
It means one rack covers several tube formats. Each face is sized for a different tube, so the same rack can hold microtubes one day and larger centrifuge tubes the next, simply by turning it to the right face.
How is this rack different from the Reversible Rack?
The Reversible Rack has two faces, both for microcentrifuge tubes. A universal multi rack has more faces and usually extends to 15 ml and 50 ml conical tubes, so it covers both small-volume and larger-volume work.
Can tubes be loaded on more than one face at once?
Only the uppermost face holds tubes upright. Tubes left in the other faces would lie sideways or fall out when the rack is turned, so unload the working face before changing to another.
Can this multi-size rack be autoclaved?
If it is polypropylene, it is generally autoclavable at 121 °C; check the rack’s rating before doing so. Lay it on its broadest side in the autoclave and let it cool completely before use.
Will my 50 ml tubes fit?
Standard 15 ml and 50 ml conical tubes have broadly similar diameters, but self-standing skirted tubes and some caps are wider. Try one tube in the hole before loading a full set; it should sit upright without being forced.
How should the rack be cleaned after a spill?
Rinse the spill off promptly with water, then wash the rack with a mild laboratory detergent and rinse again. For biological material, disinfect it with 70% ethanol or your lab’s approved disinfectant before washing.
Last Updated: September 2026










Reviews
There are no reviews yet.