The laboratory glass desiccator is a laboratory container used for maintaining a low-humidity environment around samples with the aid of a suitable drying agent. It is intended for chemistry laboratories, schools, colleges, universities and research facilities that need controlled cooling or storage of moisture-sensitive laboratory samples.
Product Description
The STEMAids Laboratory Glass Desiccator is designed for routine laboratory procedures in which dried samples, crucibles, or other compatible laboratory items need protection from atmospheric moisture. A desiccator works by enclosing the item above a suitable desiccant so that a comparatively dry internal environment can be maintained.
The product is supplied as laboratory glassware; however, the exact glass composition, nominal size, capacity and supplied accessories should be confirmed against the current STEMAids manufacturing specification before publication or tender submission. For related laboratory equipment, browse the STEMAids laboratory glassware range.
Key Features
- Low-humidity sample environment: Used with a suitable desiccant to protect dried materials from atmospheric moisture.
- Glass laboratory construction: Provides clear visibility of the contents; exact glass grade is .
- Controlled sample cooling: Suitable for cooling compatible heated laboratory items before weighing or further analysis.
- Moisture-sensitive storage: Helps limit moisture uptake when samples must remain dry between laboratory operations.
- Reusable laboratory format: Intended for repeated laboratory use when correctly cleaned, inspected and handled.
- Educational and professional use: Applicable to supervised school, college, university and laboratory workflows.
- Vacuum capability: . Do not apply vacuum unless the exact model is specifically rated for vacuum use.
Technical Specifications
|
Specification |
Detail |
|
Product Name |
Laboratory Glass Desiccator |
|
Brand |
STEMAids |
|
Product Category |
Laboratory Glassware – Desiccators |
|
Relevant Standard |
ISO 13130:2011 applies to laboratory desiccators; STEMAids product compliance |
What’s Included in the Kit
- Glass desiccator body
- Matching desiccator lid
- Perforated support plate
- Desiccant
Applications / Uses
- Cooling dried crucibles or compatible laboratory vessels before weighing.
- Temporary storage of dry or moisture-sensitive samples.
- Supporting gravimetric-analysis workflows where moisture uptake can affect measured mass.
- Maintaining laboratory specimens in a low-humidity environment using an appropriate desiccant.
- Teaching correct drying, cooling and sample-handling procedures in chemistry laboratories.
How to Use the Laboratory Glass Desiccator
- Inspect the glass body and lid for cracks, chips or other damage before use.
- Place an appropriate laboratory desiccant in the designated lower section according to your laboratory procedure.
- Position the support plate correctly if one is supplied with the model.
- Allow very hot laboratory items to cool appropriately before transferring them into the desiccator.
- Place samples or vessels securely inside without contaminating the desiccant.
- Close the lid using the sealing procedure specified for the desiccator design.
- Keep the desiccator closed except when inserting or removing samples.
Safety note: Do not use cracked or chipped glassware. Do not evacuate the desiccator unless STEMAids confirms that the specific model is designed and rated as a vacuum desiccator.
Care & Maintenance
- Clean the glass using a laboratory-compatible method and allow it to dry fully before storage.
- Inspect sealing surfaces regularly and keep them free from particles that could interfere with closure.
- Replace or regenerate the chosen desiccant according to its manufacturer’s instructions.
- Store the glass desiccator where it is protected from impact, sudden temperature changes, and bench-edge falls.
Why Choose STEMAids
STEMAids is the STEM education brand of Eduscope Smart Learning Solutions Private Limited, a New Delhi-based manufacturer. The company publishes its manufacturing, ISO quality-management, and Importer-Exporter Code credentials for institutional verification. Buyers can review the STEMAids company and manufacturing credentials, information for institutional and tender supply, and contact STEMAids for specification confirmation or quotations. Corporate certifications should not be interpreted as product-specific certification unless explicitly stated for this desiccator.
Frequently Asked Questions
What is a laboratory glass desiccator used for?
A laboratory glass desiccator is used to maintain a low-humidity environment for cooling or storing dry and moisture-sensitive samples with a suitable drying agent.
What material is the STEMAids Laboratory Glass Desiccator made from?
The product is identified as a glass desiccator. The exact glass composition or borosilicate grade is and should not be specified until verified by STEMAids.
Can this glass desiccator be used under vacuum?
Vacuum compatibility is. Never connect a laboratory desiccator to a vacuum source unless the specific model is explicitly manufactured and rated for vacuum operation.
Can a laboratory desiccator be used in schools and colleges?
Yes. Laboratory desiccators are suitable for supervised chemistry teaching involving sample drying, cooling and moisture-control procedures, subject to appropriate laboratory safety practices.
Does the desiccator come with a drying agent?
The supplied contents have not been verified. Whether desiccant is included should be confirmed before the product page is published
