Quick Answer: The Water Tap, 3 Way L Type, Euro is a three-outlet Euro-pattern laboratory water fitting whose neck rises and then turns through a right angle, in the shape of an L, used on shared benches and service spines to give several connections from a single mounting point.
The Right-Angled L Neck
In this fitting the neck goes up vertically and then bends sharply to run horizontally to the outlet, like an inverted L. The squared profile looks neat on a service spine, and its straight sections are simple to wipe down. Functionally it does the same job as the curved neck of the 3 way J type tap; buyers usually choose between them by the height and reach needed over the sink or bench, and to match the other fittings in the room.
On a 3 way L type Euro water tap, the arrangement gives three outlets from one body. In a teaching lab this lets one fitting serve both sides of an island bench with an outlet to spare, or run a condenser, a filter pump and a rinse line together. Each outlet is normally controlled by its own handle.
Neck height, reach, outlet spacing and mounting thread are not listed, and they matter when the tap stands over a sink or next to shelves. Where a single outlet is enough, the single swan neck L type tap uses the same neck shape.
Care and Upkeep
- Set up tubing with some slack so it does not pull on the outlet when apparatus is moved.
- Check the handle stops for play and have worn washers or cartridges replaced.
- Clean the body with mild detergent; strong solvents can attack handle indicators and coatings.
- Open valves slowly when a tube is attached, to avoid blowing it off.
Specifications
| Item | Three-outlet laboratory water tap |
| Neck profile | L type, vertical rise with a right-angled turn |
| Style | Euro pattern |
| Mounting | Bench top, service spine or lab furniture |
| Control | Outlets normally valved individually |
| Neck height, reach and thread | Confirm at enquiry |
Applications
- Service spines on modular chemistry and pharmacy benches.
- Island benches where students on both sides share one fitting.
- Running a water aspirator, a condenser and a rinse line at the same time.
- Wash-up points where a squared neck matches other L type fittings.
Why Choose LabEquip
Lab furniture fabricators and colleges often specify L type necks to match a squared, modern bench design. LabEquip offers this 3 way model in General Lab Products alongside the J type; send bench details through the contact page so reach and height can be checked.
Frequently Asked Questions
What does L type mean on a laboratory water tap?
It describes a neck that rises vertically and then turns through a right angle, so the outlet sits at the end of a horizontal arm. It is a squared alternative to the curved J type neck.
Should I choose the J type or the L type?
Both deliver water downward from a raised outlet. Choose by the reach and height your sink or bench needs, and by the style of the other fittings in the room, so the lab looks consistent.
How many users can a 3 way tap serve?
Three outlets allow up to three connections or users at once, for example two students on opposite sides of a bench and one apparatus line. The flow at each outlet drops when all are open.
Can a filter pump run from one outlet?
Yes, a water aspirator (filter pump) runs well from a tap outlet with good pressure. Fit a trap bottle between the pump and the filtering flask so water cannot be sucked back into the flask.
What maintenance does the tap need?
Replace worn washers or valve cartridges when an outlet drips after closing, descale nozzles in hard-water areas, and wipe the body clean. Avoid solvent cleaners on coloured handles.
Is the neck height listed?
The neck height, reach and mounting thread are not stated in this listing. Please confirm them at enquiry so the outlet clears the vessels you fill and sits correctly over the sink.
Last Updated: September 2026










Reviews
There are no reviews yet.