Search

In Stock

Vial Block

₹1,568.00

Quick Answer: The Vial Block is a metal heating block with a square grid of wells sized for small vials, pictured with 25 positions in five rows of five, used in a dry bath or block heater to heat or cool vials evenly.

Vials Need Their Own Block

Vials are wider and flatter-bottomed than microtubes, so they sit poorly in tube blocks. The vial block gives each vial a straight-sided well that matches its body, so the base and sides touch the metal and heat moves into the sample evenly.

The photo shows a compact metal block with five rows of five round wells. That grid suits a typical batch of sample vials, standards and blanks in one run, for example when derivatising samples for chromatography or warming small reagent vials.

Well diameter, depth and the heater the block fits are not given in the title. Vials come in several standard sizes, so measure yours; for mixed tubes and vials, a combination block with wells of several sizes may suit better.

Applications

  • Derivatisation of samples in sealed vials before gas chromatography
  • Warming small vials of reagents or standards to a set temperature
  • Holding vials warm while solvent is evaporated under a gentle gas stream
  • Pre-chilled use to keep vials cold during preparation

Specifications

Type Dry-bath block for vials
Form Metal block with a square grid of wells, as pictured
Positions 25 (five rows of five), as pictured
Use Heating or cooling vials in a dry bath or block heater
Vial size and heater fit Confirm at enquiry

Care & Handling

  • Choose vials that slide into the vial block wells without forcing; tight vials can crack when heated.
  • Use vials and caps rated for the set temperature, and do not overfill sealed vials.
  • Brush out the wells and dry the block after use, especially after spills.
  • Let the block cool before removing it from the heater.

Why Choose LabEquip

Analytical and chemistry labs heat vials for derivatisation and sample preparation, and a matched block keeps every vial at the same temperature. LabEquip lists dry baths such as the Digital dual block dry bath in General Lab Products; confirm vial sizes through the contact page.

Frequently Asked Questions

Why not use a tube block for vials?

Tube wells are narrow and often tapered, so a vial would not seat or would touch the metal at only a few points. A vial block’s straight wells match the vial body for even heating.

How many vials does the block hold?

The photo shows 25 wells in a five-by-five grid. Compare that count and the well size with your batch before ordering.

Is it safe to heat sealed vials?

Heating raises the pressure inside a sealed vial. Use vials and caps rated for the temperature, keep fill volumes moderate and let vials cool before opening them.

Can the block be used for evaporating solvent?

Yes. Warming vials in a block while a gentle gas stream passes over them is a common way to concentrate samples. Do this in a fume cupboard.

Will the block fit my heater?

Blocks are made for particular heaters, and the title does not name one. Compare the block’s size with the heater’s block bay before ordering.

How should the block be cleaned?

Brush the wells with mild detergent, rinse and dry the block fully. Remove solvent residue promptly so it does not mark the metal.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)