Search

In Stock

USB RS232 Adapter

$2.76

Quick Answer: A USB RS232 adapter is a cable-style converter with a USB-A plug at one end and a 9-pin RS232 serial connector at the other, which gives a modern computer a serial COM port. The USB RS232 adapter lets laptops without a serial port talk to older lab instruments, controllers and network equipment.

Bridging USB and Serial Equipment

RS232 is the long-established serial standard that many instruments still use to send readings or accept commands. Laptops dropped the 9-pin port long ago, so an adapter is needed. A converter chip in the adapter presents itself to the computer as a virtual COM port; software that expects a serial port, such as an instrument logging program or a terminal program, then uses that COM port as if it were built in. Depending on the chip and the operating system, a driver may need to be installed first.

The listing photo shows a clear cable with a blue USB-A plug, a blue 9-pin D connector (usually called DB9, strictly DE-9) with screw posts, and what appears to be a separate 9-to-25-pin adapter for equipment with the older 25-pin serial socket. The chipset, supported operating systems and cable length should be confirmed at enquiry.

RS232 signals swing between positive and negative voltages, well beyond the 3.3 V or 5 V logic of microcontroller boards. Never connect this adapter’s DB9 pins directly to an Arduino or Raspberry Pi serial pin; those need a USB-to-TTL serial adapter or a level converter. Where several adapters must run at once, a USB hub adds ports.

Specifications

Type USB to RS232 serial adapter cable
Connectors USB-A to 9-pin D-sub; 9-to-25-pin adapter pictured
Computer side Appears as a virtual COM port
Signal levels RS232, not TTL logic level
Chipset, driver support and cable length Confirm at enquiry

Typical Equipment

  • Laboratory balances, pH and conductivity meters with serial data outputs
  • Programming and monitoring PLCs in automation and mechatronics labs
  • Console access to network switches and routers, with the correct console cable
  • Older CNC machines, data loggers and GPS receivers in technical workshops

Care & Handling

  • Note which COM port number the computer assigns and set the software to match.
  • Match baud rate, data bits, parity and stop bits to the instrument’s settings.
  • Tighten the connector’s screw posts so the plug cannot work loose during a long log.
  • Unplug by the connector bodies, not by pulling the cable.

Why Choose LabEquip

Engineering colleges, technical institutes and labs with older instruments buy USB serial adapters so new laptops can still collect data from existing equipment. LabEquip carries it in General Lab Products; send the model of the instrument you need to connect through the contact page so connector and driver needs can be checked.

Frequently Asked Questions

What does a USB RS232 adapter do?

It converts between USB and the RS232 serial standard, creating a virtual COM port on the computer so software can talk to serial instruments and controllers.

Do I need a driver?

Often yes, depending on the adapter’s converter chip and the operating system. Current systems include drivers for some common chips; others need the chip maker’s driver installed first.

Can I connect it to an Arduino’s TX and RX pins?

No. RS232 uses higher positive and negative voltages that can damage 3.3 V or 5 V logic pins. Use a USB-to-TTL serial adapter for microcontroller boards.

Why do I only see garbled characters?

The communication settings do not match. Set the baud rate, data bits, parity and stop bits in the software to the values the instrument uses, and check that the correct COM port is selected.

What is a null-modem cable, and do I need one?

It crosses the transmit and receive lines. Two devices that both act as the computer end (DTE) need a null-modem cable or adapter between them; the instrument manual states which wiring it expects.

What is the 25-pin adapter for?

Some older equipment has a 25-pin serial socket. A small adapter converts the 9-pin connector to 25 pins so the same cable can be used.

Last Updated: September 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)