Quick Answer: The Tulip for MEMMERT water bath shaking system is a tulip flask clamp: a stainless steel holder with a ring at the top and curved spring legs, as pictured, that fixes onto the shaking frame of a Memmert water bath and grips a conical flask while it is shaken.
Why It Is Called a Tulip
Tulip is borrowed from the French tulipe, the name suppliers use for this style of flask holder. The photo shows why: a round wire ring at the top and curved metal legs that swell outward and then close towards the base, like the petals of a tulip. The base fixes to the frame, the flask is pushed in from above, and the legs spring around its body while the ring steadies it higher up.
A flask shaken inside a water bath would otherwise slide, float or tip. The tulip holds it at a fixed spot on the Memmert shaking system’s frame, so the flask follows every stroke and its contents swirl instead of the flask wandering about. Holders of this kind are made for one flask size each, so the flask volume in use decides which tulip is needed.
Tulips suit conical flasks, the vessel most used for shaken cultures because the wide base gives a large liquid surface for air exchange. For tubes instead of flasks, the rack for the WTB shaking system mounts on the same kind of frame.
Specifications
| Type | Flask clamp for a water bath shaking system |
| Made for | Memmert water bath shaking system, as titled |
| Material | Stainless steel, as pictured |
| Form | Top ring with curved spring legs on a base, as pictured |
| Vessel | Conical (Erlenmeyer) flask |
| Flask size it holds | Confirm at enquiry |
Where Tulip Clamps Are Used
- Shaken flask cultures of bacteria, yeast or fungi at a controlled temperature
- Enzyme reactions in flasks that need steady mixing and warmth
- Extractions of plant, soil or food samples in flasks
- Dissolution trials where a solid must be kept moving in warm liquid
Care & Handling
- Fix the tulip firmly to the frame and check it again after the first run with a full flask.
- Push flasks in straight and never force an oversized flask, which spreads the legs and weakens the grip.
- Rinse and dry after use, and wipe off salt or culture spills promptly.
Why Choose LabEquip
Microbiology and biotechnology labs running shaken flask cultures in a Memmert bath buy tulips in the sizes of flask they use. LabEquip lists them in General Lab Products alongside conical flasks; send your flask sizes through the contact page.
Frequently Asked Questions
What does tulip mean in the product name?
It comes from the French tulipe, the name for this flask holder shape. The curved legs and top ring look like the petals of a tulip and close around the flask body.
Which flasks does a tulip hold?
Conical (Erlenmeyer) flasks, one size per tulip. The legs are shaped for a particular flask diameter, so choose the tulip that matches the flask volume you use.
Can a tulip be used on another maker’s shaker?
It is made for the Memmert water bath shaking system. Other shakers use different frames and fixings, so it may not mount securely on them.
How full should a shaken flask be?
For cultures, filling to about a fifth of the flask volume is a common starting point, which leaves a large surface for air exchange. Fuller flasks aerate poorly and splash more easily.
Why does my flask rattle in the tulip?
The flask may be smaller than the size the tulip is made for, or the legs may have been spread by forcing a larger flask. Use the matching size and replace a tulip that no longer grips.
Can the tulip be autoclaved?
Stainless steel holders are generally autoclavable. Remove it from the frame first and let it cool before refitting.
Last Updated: October 2026










Reviews
There are no reviews yet.