Quick Answer: The Tripod Stand, Sheet Type, MS is a mild steel heating tripod formed from flat sheet or strip rather than bent wire or a casting, used to hold a wire gauze and vessel over a Bunsen burner in school and college chemistry. The title names the construction and the metal; dimensions and finish are confirmed on request.
Sheet Construction in Mild Steel
Heating tripods are made in three broad ways: bent from round wire, cast in iron, or formed from sheet. A sheet type tripod stand in mild steel has its top ring, and often its legs, formed from flat steel strip or pressed sheet. Compared with a wire tripod, the flat top gives a gauze a wider seat; compared with a cast tripod, it is lighter and not brittle, so a stand that is dropped bends rather than cracks and can usually be straightened.
Mild steel (MS) is strong and easy to form, but it rusts when bare. Mild steel lab stands are therefore normally painted or coated, and that coating is what protects them. Near the flame the paint will darken over time; elsewhere, chips should be touched up before rust creeps under the paint. This is the main practical difference from the stainless steel plate type tripod, which needs no protective coating.
The title does not describe the leg form, height or top diameter. Confirm these with LabEquip before ordering, especially if the tripods must match gauzes and burners already in use.
Applications
- Everyday beaker heating on wire gauze in school chemistry practicals
- Boiling water baths for food tests and enzyme experiments in biology
- Heating a crucible on a pipeclay triangle
- Portable heating stations for outreach demonstrations with a spirit lamp
Care & Handling
- Touch up chips in the paint on the sheet type tripod before rust spreads beneath the coating.
- Dry the stand after boil-overs and store it in a dry cupboard.
- If a leg is bent, straighten it on a flat surface and check that the top sits level before the next use.
- Keep the stand on a heat-resistant mat; the top plate conducts heat into anything it touches.
Specifications
| Type | Heating tripod, sheet construction |
| Material | Mild steel (MS) |
| Protection | Mild steel stands are normally painted or coated against rust |
| Holds | Wire gauze with beaker or flask; pipeclay triangle with crucible |
| Behaviour on impact | Bends rather than cracks, unlike cast iron |
| Height, top diameter and finish | Confirm at enquiry |
Why Choose LabEquip
Schools that need many tripods for class practicals often choose mild steel sheet stands for their balance of stiffness and light weight. LabEquip supplies them within its General Lab Products range; contact LabEquip with quantities and the burner height you work with.
Frequently Asked Questions
What does sheet type mean for a tripod stand?
It means the stand is formed from flat steel sheet or strip rather than bent from round wire or cast in iron. The flat top gives a gauze a wider resting surface than a wire ring.
What does MS stand for?
MS means mild steel, a low-carbon steel that is strong and easy to form. It rusts if left bare, so mild steel lab stands are painted or coated.
How does a sheet type tripod compare with a cast iron one?
It is lighter and does not crack if dropped, because steel bends rather than breaking. A cast iron tripod is heavier and so resists being knocked over better.
How can I stop a mild steel tripod from rusting?
Keep the coating intact, dry the stand after spills and boil-overs, and store it somewhere dry. Touch up chipped areas with heat-resistant paint away from the hottest zone.
Can the tripod be used with a spirit lamp?
Yes, if the flame reaches close enough to the gauze. Spirit flames are cooler and shorter than Bunsen flames, so a lower tripod or a raised lamp may be needed.
Should the tripod go in a fume cupboard?
Only when the heating produces fumes. The tripod gives off nothing itself, but acid vapour in a fume cupboard attacks bare mild steel, so check the coating regularly if it is used there.
Last Updated: September 2026










Reviews
There are no reviews yet.