Search

In Stock

Thermostatic bath CORIO C-BT

$552.22

Quick Answer: The Thermostatic bath CORIO C-BT is a heated circulating bath with a transparent tank: a CORIO circulator head with a digital display, pictured clamped to the rim frame of a clear rectangular tank, that heats and circulates the bath water while the samples inside stay in full view.

Why Choose a See-Through Bath

With an opaque tank, checking a sample means leaning over the bath or lifting the item out, which lets heat escape and disturbs timed work. The CORIO C-BT turns this around: the walls of the tank are clear, so tubes, flasks, colour changes, sediment and liquid levels can be watched from the side while the head holds the temperature. The pictured tank has a light frame around its rim with built-in grips at the ends.

The circulator head is the active part. Its heater and pump reach down into the water at one end of the tank, and its controller shows the temperature on the front display. Moving water carries heat to every corner, so samples at the far end of the tank stay close to the reading at the head, which an unstirred bath cannot match.

Transparent bath tanks are generally made from polycarbonate or a similar clear plastic. That brings one limit to keep in mind: clear plastics tolerate lower temperatures than stainless steel and can craze on contact with solvents. For work near boiling, or with oils, the stainless steel CORIO C-B is the safer choice; for demonstrations and sample observation at moderate temperatures, the transparent tank is the reason to choose the C-BT.

Where the Transparent Bath Fits

  • Classroom demonstrations of temperature effects, such as enzyme activity or solubility, watched from the side
  • Observing precipitation, colour development or phase separation during a timed incubation
  • Comparing thermometers in a stirred bath with their bulbs in view
  • Conditioning samples at moderate temperatures for density or viscosity tests

Care & Handling

  • Clean the tank with mild detergent and a soft cloth; scouring pads, acetone and other solvents scratch or craze clear plastics.
  • Keep the water between the minimum and maximum marks and top up during long runs.
  • Use distilled water so scale lines do not form on the clear walls.
  • Carry the bath by the rim-frame grips, and only when it is empty.

Specifications

Type Heating circulator on a transparent bath tank
Series CORIO C-BT, as titled
Tank Clear rectangular tank with rim frame and end grips, as pictured
Control head Digital display with navigation keys, as pictured
Circulation Internal pump in the head
Tank material, volume and maximum temperature Confirm at enquiry

Why Choose LabEquip

Teaching labs and research groups that need to see their samples while they incubate pick the transparent C-BT over a steel tank. LabEquip lists it in General Lab Products; tell us your working temperatures through the contact page so we can confirm that the tank suits them.

Frequently Asked Questions

What does the T in C-BT stand for?

It marks the transparent-tank version of the CORIO thermostatic bath. The circulator head is of the same kind as on the stainless steel C-B; the tank is what differs.

What is the tank made of?

The title does not say. Clear bath tanks are usually made from polycarbonate or a similar plastic, so ask us for the tank’s maximum temperature before planning hot work.

Can the C-BT be used near boiling?

Clear plastic tanks are generally made for moderate temperatures. For water near boiling, or for oil baths, a stainless steel tank such as the C-B is the better choice.

Why does a circulating bath give a more even temperature?

The pump keeps water flowing past the heater and around the tank, so no warm layers or cool corners form. Samples at either end of the tank then sit close to the displayed temperature.

How should the clear tank be cleaned?

Use mild detergent, warm water and a soft cloth, then rinse with distilled water. Avoid abrasive pads, acetone, chlorinated solvents and strong alkaline cleaners.

Should the bath be covered during use?

A cover reduces evaporation and heat loss and keeps the water level steady over long runs. With a transparent tank the cover can stay closed, because samples are checked through the walls.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)