Quick Answer: This Test tube holder is pictured as a stainless steel rack insert for water baths: a perforated basket with rows of round openings and two carrying handles, used to stand test tubes upright in the water and lift the whole set out at once.
A Bath Rack, Not Hand Tongs
In English the phrase test tube holder often means hand tongs for gripping one hot tube over a flame. The photo of this item shows something different: a perforated stainless steel insert with rows of round holes in its top plate and a handle at each end. It is a rack that stands in a water bath, and the name most likely comes from a translated catalogue term for a tube rack.
The open, perforated walls let bath water flow freely around each tube, so all of them sit at the bath temperature. Because the tubes are carried together, a whole set can be moved from a hot bath into ice, or from bench to bath, in one movement, which keeps the timing identical for every tube in a series.
Hole diameter and the number of positions are not stated in the title. Tubes should drop in and out of the holes freely without being so loose that they lean against each other.
Applications
- Holding a series of tubes at one temperature for enzyme or reaction-rate experiments
- Moving a full set of tubes between a hot bath and an ice bath together
- Tube-based heating steps in molecular biology and serology
- Keeping tubes upright and in numbered order during long incubations
Specifications
| Type | Tube rack insert for water baths, as pictured |
| Material | Perforated stainless steel, as pictured |
| Handles | One at each end for lifting the loaded rack |
| Layout | Rows of round openings in the top plate |
| Hole size and position count | Confirm at enquiry |
Care & Handling
- Lift the loaded test tube holder by both handles and keep it level so tubes do not tip.
- Wear heat-resistant gloves when lifting it out of hot water, as the handles warm up too.
- Rinse and dry the rack after use, and descale it with a stainless steel descaler if deposits form.
- Check that the rack fits the tank with room for water to circulate before filling the bath.
Why Choose LabEquip
Teaching and research labs use bath racks like this one to handle tube series cleanly and safely. LabEquip lists water baths such as the Water bath with lid in General Lab Products, and confirms which tube diameters a rack takes through the contact page.
Frequently Asked Questions
Is this a holder for heating tubes over a flame?
No. The photo shows a rack insert that stands in a water bath, not hand tongs. For holding a single tube over a burner, use wooden or metal test tube tongs.
Why use a bath rack instead of placing tubes straight in the water?
Loose tubes float, tip and roll, and are hard to keep in order. A rack keeps them upright, spaced and in sequence, and lets you lift them all out together.
Will the rack fit my water bath?
The tank must be large enough to take the rack with water around all sides and deep enough to cover the tube contents. Compare the rack’s footprint and height with your tank before ordering.
Which tubes does it hold?
Tubes whose outside diameter is a little smaller than the holes. Measure your tubes and give that figure when you enquire, so the hole size can be matched.
Can the rack go into an ice bath?
Stainless steel copes with cold as well as heat, so moving the rack from a hot bath into ice water is a common use. Dry it afterwards to avoid water marks.
Can it be autoclaved?
All-stainless steel racks are generally autoclavable. The red parts on the handles in the photo may be plastic, so check them first, and dry the rack fully afterwards.
Last Updated: October 2026










Reviews
There are no reviews yet.