Search

In Stock

Stainless steel stand

$22.59

Quick Answer: The Stainless steel stand is pictured as a two-tier tube rack: two stainless steel plates with rows of round holes, held between folded side panels with outward top flanges, used to keep test tubes upright in a water bath or on the bench.

Reading the Photo: a Rack Rather Than a Retort Stand

In laboratory English a stand often means a retort stand with a rod and a heavy base. The item pictured here is not that: it is a polished stainless steel frame with an upper and a lower perforated plate, so each tube is held at two points and stands straight. ‘Stand’ is probably a translation of a catalogue word for a support or rack.

The side panels end in flanges folded outwards at the top, a shape used to rest a rack on the rim of a bath tank or to give a lip to lift it by. Hung in a bath of matching width, the tubes sit in the water while the rack stays put; on the bench, the same frame works as an ordinary tube rack.

Two-plate racks keep tall tubes from leaning and touching, which keeps labels readable and stops tubes knocking together in a stirred or shaking bath. Hole diameter, number of positions and the tank width it suits are not given in the title.

Applications

  • Holding tubes upright in a water bath during incubations
  • Keeping a numbered series of tubes in order for timed experiments
  • Standing tubes on the bench while they cool or drain
  • Supporting tubes in an ice bath after a heating step

Care & Handling

  • Rinse the stainless steel stand after use and dry it, paying attention to the folded edges where water collects.
  • Descale with a product meant for stainless steel if white deposits appear on the plates.
  • Handle a rack taken from hot water by its flanges and with gloves; the steel conducts heat.
  • Do not bend the side flanges to force a fit, as that twists the plates out of line.

Specifications

Type Two-tier tube rack (stand), as pictured
Material Stainless steel, as titled
Tube support Upper and lower plates with round holes
Sides Folded panels with outward top flanges
Hole size, positions and bath fit Confirm at enquiry

Why Choose LabEquip

Water-bath users who handle many tubes at once prefer a two-plate rack that keeps every tube straight and separate. LabEquip lists a handled test tube holder basket and other bath racks in General Lab Products; ask about hole sizes through the contact page.

Frequently Asked Questions

Is this a retort stand?

No. The photo shows a two-tier tube rack, not a rod-and-base retort stand. For clamping glassware above the bench, use a retort stand with a boss head and clamp.

Why does the rack have two plates?

The upper plate holds each tube near its top and the lower plate near its base, so the tube stays vertical. With a single plate, long tubes can lean and touch their neighbours.

Can the rack hang inside a water bath?

Its outward-folded top flanges are shaped for resting on a tank rim, which suits hanging use in a bath of matching width. Measure the inside width of your tank before relying on this.

Which tube sizes fit?

Tubes slightly narrower than the holes give the right fit. The hole size is not given in the title, so measure your tubes’ outside diameter and compare.

Is stainless steel suitable for hot water?

Yes. Stainless steel tolerates hot water and steam and does not soften or warp at water-bath temperatures. Dry it afterwards to avoid spotting.

Can the rack be autoclaved?

An all-stainless steel rack can normally be autoclaved. Dry it thoroughly afterwards so water does not stand in the folds.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)