Quick Answer: The Stainless steel opening lid is a deep, box-shaped stainless steel lid for a water bath or heated tank, pictured with a knob on the front and small holes in the top; ‘opening’ describes a lid that opens for access rather than one lifted off.
What an Opening Lid Adds
The phrase ‘opening lid’ is a literal rendering of a common catalogue term for an openable or hinged lid. The stainless steel opening lid in the photo is deep rather than flat, with straight sides, a knob on the front face and a few small holes near one corner of the top.
A deep lid gives headroom: bottles, stoppered flasks and racks of tall tubes can stand in the bath with the lid closed over them. If the lid is hinged, as its name suggests, it is raised by the front knob and swings back, so steam rises away from the operator and the lid never has to be set down while samples are loaded.
Small holes in a bath lid are usually there for a thermometer or probe to pass through, or to let a little steam vent. How this lid attaches to its bath, and which tank size it suits, are not stated in the title.
Specifications
| Type | Openable lid for water baths or heated tanks |
| Material | Stainless steel, as titled |
| Shape | Deep, box-shaped lid with a front knob, as pictured |
| Top | Small holes near one corner, as pictured |
| Bath model and fixing | Confirm at enquiry |
Applications
- Covering a bath that holds tall bottles or stoppered flasks
- Long incubations where steam and evaporation must be kept in
- Runs that need a thermometer or probe passed through the lid
- Keeping debris out of a bath that stays filled between uses
Care & Handling
- Open the stainless steel opening lid slowly and keep your face away from the gap, as steam escapes first.
- Dry the inside of the lid after use so condensate does not leave scale.
- Wipe with mild detergent and a soft cloth; avoid chlorine-based cleaners on stainless steel.
- Check the knob and any fixings for looseness from time to time.
Why Choose LabEquip
Labs that heat tall vessels or run long covered incubations choose a deep stainless lid over a flat plate. LabEquip lists flat options such as the flat stainless steel bath cover in General Lab Products; send your bath model through the contact page to match the right lid.
Frequently Asked Questions
What does opening lid mean?
It means a lid that opens, usually on a hinge, rather than one lifted off completely. The wording comes from a direct translation of the catalogue term.
Why is the lid so deep?
The extra height leaves room for tall bottles, stoppered flasks and racks that stand above the bath rim. A flat lid would have to come off for vessels like these.
What are the small holes in the top for?
Holes like these usually take a thermometer or temperature probe, or let a little steam vent. They also allow the water temperature to be checked without opening the lid.
Will the lid fit my bath?
The lid is made for a particular tank size, which the title does not give. Compare the lid’s footprint and fixing with your bath before ordering.
Does the lid stay cool?
No. Stainless steel warms up in steam, so the top and sides get hot at higher set temperatures. Use the knob to open it and wear gloves if you must hold the edges.
How should the lid be cleaned?
Wash it with warm water and mild detergent, rinse and dry. Remove white scale with a descaler intended for stainless steel.
Last Updated: October 2026










Reviews
There are no reviews yet.