Quick Answer: The Silicon Rubber Cork for Filtration Flask is a bored silicone rubber stopper that fits the neck of a filtering (Buchner) flask and holds the stem of a Buchner or Hirsch funnel through its hole, making an airtight seal so that suction from the side arm draws liquid through the filter.
The Seal That Makes Vacuum Filtration Work
In vacuum filtration the pump lowers the pressure inside the flask, and the atmosphere pushes the liquid through the filter paper. For that to happen, the only way air can enter the flask must be through the filter. A stopper that leaks around the neck or the funnel stem lets air in, and filtration slows or stops. The bored cork closes the neck and grips the funnel stem, turning funnel and flask into one sealed unit.
Silicone rubber, written ‘silicon’ in the title, suits this job well. It generally stays flexible over a wide temperature range, hardens and turns sticky more slowly than natural rubber, and is commonly autoclavable, which helps in microbiology media filtration. A silicone rubber cork is also less likely to bond to hot glass than natural rubber, so it comes out easily after hot filtrations. Silicone does swell in some non-polar solvents, which is worth checking when filtering organic mixtures.
A bored cork fits one neck size and one range of funnel stems. For a flask whose neck does not match, or for a set of funnels of different sizes, conical adapters such as the Rubber Cones for Filtration Flask cover several sizes instead. The cork is used with a Filtering Flask and a Buchner or Hirsch funnel.
Specifications
| Item | Bored stopper (cork) for filtration flasks |
| Material | Silicone rubber |
| Fits | Neck of a filtering flask, with a hole for the funnel stem |
| Used with | Buchner and Hirsch funnels under vacuum |
| Neck size and bore | Confirm at enquiry |
Applications
- Buchner filtration of precipitates in school and college chemistry.
- Recrystallisation work in which hot solutions are filtered under suction.
- Filtration of culture media and solutions in microbiology, with the stopper autoclaved alongside the assembly if its rating allows.
- Replacing hardened natural rubber stoppers on existing filtration flasks.
Care & Handling
- Wet the funnel stem and push it into the bore with a twisting motion; never force it, as funnel stems can snap.
- Autoclave only if the rating allows, and let the cork cool before handling.
- Clean with warm detergent solution and rinse with distilled water.
- Keep it away from sharp edges that could cut the bore and cause leaks.
Why Choose LabEquip
Chemistry and microbiology teaching labs, pharmaceutical QC and research labs buy silicone corks to fit their filtration flasks. LabEquip lists them in General Lab Products; send the flask neck size through the contact page.
Frequently Asked Questions
Why is the cork called ‘silicon’ in the title?
The material is silicone rubber, a synthetic rubber; ‘silicon’ is the chemical element and is often used by mistake in product names.
What advantage does silicone have over natural rubber for this cork?
Silicone generally stays flexible and non-sticky for longer, tolerates higher temperatures and is commonly autoclavable. Natural rubber tends to harden, crack or stick to glass over time.
Can the cork be autoclaved?
Silicone rubber is generally autoclavable at the usual 121 °C cycle, but check this cork’s rating before sterilising it.
How do I stop the filtration flask leaking at the cork?
Make sure the cork matches the neck size, the funnel stem fits snugly in the bore and the glass is clean. Wetting both surfaces slightly with water improves the seal.
When should I use rubber cones instead of a bored cork?
Cones suit mixed flask necks and funnels, because one cone covers a range of sizes. A bored cork gives a firmer grip on one neck and funnel combination.
Is silicone rubber resistant to organic solvents?
It resists water, alcohols and many aqueous solutions, but swells in some non-polar solvents such as hydrocarbons. For filtrations in those solvents, keep contact short or choose a different stopper material.
Last Updated: September 2026









Reviews
There are no reviews yet.