Search

In Stock

Shaking Water Bath SW22

$886.16

Quick Answer: The Shaking Water Bath SW22 is a laboratory water bath with a built-in shaking mechanism, pictured as a white-cased bath with a digital control panel, a hinged clear cover and a tray of tube racks, used to incubate flasks and tubes at a set temperature while they are shaken.

Heat and Motion in One Unit

SW22 is the model name JULABO uses for one of its shaking water baths. The unit combines a heated tank with a shaking tray driven from inside the housing, so one bench footprint does the work of a water bath plus a separate shaker. The tray moves back and forth in a straight line, a reciprocating motion that swirls the liquid in flasks and tubes evenly.

Heating and shaking together matter for work that depends on both mixing and temperature. Aerobic cultures grow better when shaking draws air into the medium; enzyme digestions and extractions finish sooner and more evenly when contents keep moving. Water carries heat into vessels far better than air does, which is why a shaking water bath is often chosen over an air-heated shaker when temperature has to be held closely.

The photo shows the bath loaded with racks of coloured tubes and a clear gabled cover raised at the back. Accessories change what the tray can carry: a universal support for spring clamps holds conical flasks of mixed sizes, and the openable Makrolon bath cover cuts evaporation while samples stay visible. Tank volume, temperature range and speed settings are not given in the title and should be checked against your method.

Specifications

Type Shaking water bath: heated bath with built-in shaker
Model SW22, as titled
Shaking motion Reciprocating, back and forth in a straight line
Controls Digital display with keypad, as pictured
Cover Clear hinged gable cover, as pictured
Tank volume, temperature range and speed Confirm at enquiry

Applications of a Shaking Water Bath

  • Growing aerobic bacterial and yeast cultures in flasks at 30 to 37 °C with good aeration
  • Enzyme digestions and protein incubations that need gentle, continuous mixing
  • Extraction of analytes from food, soil or plant samples at a controlled temperature
  • Dissolution and solubility work where solids must stay suspended

Care & Handling

  • Fill with distilled or deionised water to the level marked in the tank and top up regularly, since running low on water can damage the heater or stop the bath.
  • Fix every flask and rack to the tray before starting, and raise the speed gradually.
  • Wipe out the tank and tray after use, and drain the bath for long idle periods to prevent algae and scale.
  • Keep the control panel dry, and let the bath cool before draining it.

Why Choose LabEquip

Microbiology, biotechnology and food testing labs buy the SW22 when cultures and digests need heat and shaking in one unit. LabEquip lists it in General Lab Products; send your method’s temperature and speed needs through the contact page.

Frequently Asked Questions

How does a shaking water bath differ from an incubator shaker?

Both heat and shake samples. The water bath transfers heat through water, so vessels reach the set temperature faster and more evenly; an incubator shaker heats air and suits larger flasks or dry set-ups.

What kind of shaking does the SW22 use?

A reciprocating, back-and-forth motion in a straight line. It swirls liquid in flasks and tubes along the direction of travel, which suits most culture and extraction work.

Which water should go in the bath?

Distilled or deionised water limits scale on the heater and tank. Tap water leaves deposits over time, and additives should only be used if the maker’s instructions allow them.

Can flasks of different sizes be shaken together?

Yes, with a tray or support that accepts clamps of different sizes. Spread the load evenly and keep liquid volumes low enough not to splash.

Why keep the cover closed during shaking?

A cover limits evaporation and heat loss, keeping the water level and temperature steady over long runs. A clear cover lets you watch samples without opening it.

How should the bath be maintained?

Change the water regularly, wipe out the tank and drain it before long breaks. Check that the shaking tray moves freely and that its fixings are tight.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)