Search

In Stock

Openable bath cover in Makrolon

$14.10

Quick Answer: The Openable bath cover in Makrolon is a clear, hinged lid for a laboratory water bath, pictured as a gable-shaped cover moulded in Makrolon, a trade name for polycarbonate, that lifts open for access and closes to cut evaporation and heat loss.

Why a Clear, Hinged Cover

Makrolon is a brand of polycarbonate, a tough, transparent plastic that keeps its shape at the temperatures used in water baths. A Makrolon bath cover lets you see racks, flasks and colour changes through the lid, so the bath does not have to be opened to check samples. Every time a lid is lifted, heat and moisture escape and the temperature dips, so a clear cover saves both.

The photo shows a gabled lid with hinges along one long side and a knob at the end. Openable means it lifts on those hinges rather than coming off, so it stays with the bath and never ends up on a dirty bench. The sloping roof makes condensation run down the inside of the lid and back into the tank, instead of dripping onto open tubes.

Covers like this are sized for a particular bath. The image file refers to a lift-up cover for SW shaking baths, the family that includes the SW22 shaking water bath listed alongside it.

When the Cover Makes a Difference

  • Long incubations at 37 °C or above, where evaporation would otherwise lower the water level
  • Shaking water bath runs where splashes must stay in the tank
  • Teaching demonstrations where students watch samples without opening the bath
  • Keeping dust and debris out of a bath between runs

Specifications

Material Makrolon (polycarbonate), as titled
Form Gable-shaped lid, as pictured
Opening Hinged along one side and lifts up, as pictured
Transparency Clear, so samples stay visible with the lid closed
Purpose Cuts evaporation and heat loss; returns condensate to the tank
Bath model it fits Confirm at enquiry

Care & Handling

  • Clean with mild detergent, water and a soft cloth; scouring pads scratch polycarbonate.
  • Keep acetone, other solvents and strong alkaline cleaners away from the cover, as they can craze or cloud it.
  • Lift the cover slowly so condensate drains back into the tank before it opens fully.
  • Do not autoclave the cover unless it is rated for it.

Why Choose LabEquip

Labs running long or shaken incubations add a clear hinged cover to hold temperature and water level steady. LabEquip lists it in General Lab Products; send your bath model through the contact page.

Frequently Asked Questions

What is Makrolon?

Makrolon is a trade name for polycarbonate, a tough, clear plastic. It suits bath covers because it is transparent, resists knocks and keeps its shape at water-bath temperatures.

Why is the cover gable-shaped?

The sloping roof lets condensation run down the inside and back into the tank. A flat lid would collect drops that fall onto samples.

Does a cover really reduce evaporation?

Yes. Most water loss from an open bath happens at the surface, and a closed cover traps the vapour so it condenses and returns. The bath also needs less heating to hold its setting.

Can the cover be removed completely?

It is designed to open on hinges and stay with the bath. Depending on the hinge fitting it may lift off for cleaning, so check how it attaches on your bath.

Can polycarbonate be cleaned with alcohol?

Brief wiping with dilute ethanol is generally tolerated, but acetone, other solvents and strong alkalis can craze polycarbonate. Mild detergent and water is the safest routine clean.

Will the cover fit any water bath?

No. It is sized and hinged for a particular bath footprint. A cover that does not seat properly lets heat and vapour escape at the edges.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)