Quick Answer: Multiposition magnetic stirrer with inline heating is a heated magnetic stirrer whose stirring positions are arranged in one straight row on a warmed plate. In this multiposition magnetic stirrer with inline heating, ‘inline’ describes that row layout rather than a heater in a flowing pipe.
What In-Line Means for This Stirrer
The product name appears to be translated from a French listing, in which ‘en ligne’ means arranged in a line. The stirring positions sit side by side in a single row along a heated plate instead of in a square grid. A row fits the long, shallow working area of a fume cupboard or a narrow bench, and it keeps every vessel within easy reach from the front.
A row also suits ordered series. A set of dilutions or a sequence of samples can run from left to right in the same order as the results table, so students read the vessels as they would read a line of text. Label each position number on the vessel as well, because the positions look alike.
Along a heated row, the end positions tend to lose more heat than the middle ones, so check the liquid temperature at each end and in the centre when results depend on it. The number of positions and the heating range are not stated in the title.
Care of the Heated Row
- Keep the row level; an uneven bench makes the bars at one end wander.
- Place vessels from one end to the other and remove them in the same order, so no one reaches across hot glass.
- Let the whole plate cool before cleaning, then wipe along the row with a damp cloth, the unit unplugged.
- Keep cables and paper away from the long heated front edge.
Specifications
| Type | Heated multiposition magnetic stirrer |
| Layout | Stirring positions in a single row (in-line) |
| Heating | Warmed plate under the row of positions |
| Suited vessels | Matching beakers, flasks or bottles, one per position |
| Number of positions and heating range | Confirm at enquiry |
Where an In-Line Layout Suits
- Fume cupboard work with several heated vessels that must all be reachable from the sash opening
- Ordered dilution or concentration series stirred in sequence
- Group practicals in which each student stands in front of one position along the bench
- Comparing samples from left to right in the order they are recorded
Why Choose LabEquip
Row-type heated stirrers are chosen by labs that work inside fume cupboards or along narrow benches, and by teachers who run ordered sample series. LabEquip lists this model in its General Lab Products range along with the multi-position magnetic stirring hotplate for comparison; describe your bench space through the contact page.
Frequently Asked Questions
What does ‘inline heating’ mean in the product name?
It describes a heated plate with the stirring positions arranged in one line. The name seems to come from a French description; it does not refer to a heater fitted in a pipe or tube.
Why choose a row instead of a grid of positions?
A row fits narrow benches and fume cupboards, keeps every vessel reachable from the front and matches ordered series. A grid packs more vessels into a square footprint but puts some of them at the back.
Are the end positions as warm as the middle?
Usually a little cooler, because the ends lose heat to the air on more sides. Measure the liquid at the ends and in the centre, and adjust the setting or the vessel order if needed.
Can it be used inside a fume cupboard?
Yes, which is one advantage of the row layout. Route the mains lead away from spills, keep the extraction running and never heat low-flash-point solvents on the plate.
How should a series be arranged?
Put the lowest concentration at one end and work across, labelling each vessel with its position number. Record results in the same order to avoid mix-ups.
Do all positions stir at the same rate?
Only if vessels, volumes and bars match. Use identical beakers and bars along the row, and check that each bar is turning before leaving the series to heat.
Last Updated: September 2026










Reviews
There are no reviews yet.