Search

In Stock

Lid for water bath

$15.23

Quick Answer: The Lid for water bath is a clear, raised cover with curved ends and a handle on top, as pictured, that closes a water bath tank to reduce evaporation and heat loss while the samples stay visible.

Why a Raised, Clear Lid

A flat lid sits just above the water and covers only what is already below the rim. The lid for water bath in the photo is raised and curved, so there is room under it for tubes in tall racks or bottles with caps, and it can stay on while those vessels are in the bath.

The curved shape also controls condensation. Water vapour condenses on the inside of any lid; on a curved one the droplets run down the walls and back into the tank at the edges rather than falling onto open tubes in the middle. Being clear, the lid shows the samples and the water level without being lifted.

Clear bath lids are often made of polycarbonate, but the material of this one is not stated in the title, and neither is the tank size it fits. Both matter: the lid must suit the bath temperature and sit square on the tank rim.

Care & Handling

  • Clean the lid for water bath with mild detergent and water; avoid acetone and other solvents that can craze clear plastics.
  • Check the lid material’s temperature limit before using it on a bath run near boiling.
  • Lift it by the top handle and let the steam clear before reaching into the tank.
  • Store it on its rim or hanging up, not under heavy items that could crack it.

Specifications

Type Raised lid for water bath tanks
Appearance Clear, with curved ends and a top handle, as pictured
Function Cuts evaporation and heat loss; sheds condensate to the sides
Headroom Raised shape leaves space for taller vessels
Tank size and material rating Confirm at enquiry

Applications

  • Covering a bath with racks of tubes standing above the rim
  • Incubations of open plates or tubes that must not catch drips
  • Checking water level and samples during long runs without opening the bath
  • Keeping dust out of a bath kept filled between uses

Why Choose LabEquip

Labs that need to see their samples during covered runs use a clear, raised lid instead of a steel plate. LabEquip lists steel alternatives such as the stainless steel opening lid in General Lab Products, and matches lids to tank sizes through the contact page.

Frequently Asked Questions

What is the advantage of a raised lid?

It leaves headroom for tall racks, capped bottles and flasks, so the bath stays covered with them inside. A flat lid covers only vessels that sit fully below the rim.

Will condensation drip onto my samples?

A curved lid sends most condensate down its sides and back into the tank. Some droplets can still form, so cap sensitive tubes when possible.

Is the lid heat resistant?

Clear lids differ in their temperature limits, and this listing does not state the material. Check the rating before using it on a bath set near boiling.

Can the lid be autoclaved?

Do not autoclave a clear plastic lid unless its material is known to tolerate it. Clean it with mild detergent instead, and disinfect with a product compatible with the plastic.

How do I choose the right size?

Measure the inside length and width of your bath tank and compare them with the lid’s footprint. The lid should rest on the rim without gaps or rocking.

How should a clear lid be cleaned?

Use warm water, mild detergent and a soft cloth, then rinse and air dry. Abrasive pads and solvents scratch or cloud the surface.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)