Search

In Stock

Flat Stainless Steel Cover

$11.54

Quick Answer: The Flat Stainless Steel Cover is a flat stainless steel plate that lies over a water bath tank; the photo shows round openings in it, so flasks or beakers can stand in the water through the cover while the rest of the surface stays closed.

Openings Instead of a Solid Lid

A solid lid works only when everything fits underneath it. As soon as a flask neck, a condenser or a thermometer has to stand above the water line, the lid comes off, and the bath then loses heat and water across its whole surface. A flat stainless steel cover with openings solves this by letting the vessels pass through while the rest of the tank stays covered.

Covers of this design are commonly used with sets of concentric rings: the full opening takes a large flask, and adding rings closes it down to suit a smaller neck, so the gap around the vessel stays small. Whether rings come with this cover, and the size and number of openings, are not stated in the title and should be agreed when ordering.

Being flat and made of stainless steel, the cover lies low on the tank rim, copes with steam and wipes clean easily. It is a different item from the flat stainless steel bath cover with a handle, which is pictured as a plain lid without openings.

Where a Cover with Openings Helps

  • Heating round-bottom or conical flasks whose necks must stay above the cover
  • Water-bath reflux or distillation set-ups with a condenser on the flask
  • Long incubations of media bottles where evaporation would otherwise be heavy
  • Holding beakers steady so they do not float or tip as the bath fills

Care & Handling

  • Lift the flat stainless steel cover by its edges with heat-resistant gloves, since it warms up quickly in the steam.
  • Wipe off condensate and dry the plate after use so water spots and scale do not build up.
  • Keep any rings with the cover so the set stays complete.
  • Clean with mild detergent; avoid chloride bleach, which can pit stainless steel.

Specifications

Type Flat cover for water bath tanks
Material Stainless steel, as titled
Openings Round openings for vessels, as pictured
Function Covers the tank while vessels stand in the water
Bath fit, opening count and rings Confirm at enquiry

Why Choose LabEquip

Labs that heat flasks in water baths for extractions, digestions or reflux work use a cover with openings to save water and keep the temperature steady. LabEquip lists bath covers and accessories in General Lab Products and matches cover size to your tank through the contact page.

Frequently Asked Questions

Why choose a cover with openings over a plain lid?

A cover with openings stays in place while flasks stand through it, so the bath remains covered for the whole run. A plain lid has to come off whenever a vessel is taller than the space under it.

What are concentric rings used for?

Rings sit in an opening and reduce its diameter to suit a smaller flask neck. They close the gap around the vessel, which cuts evaporation and helps hold the flask upright.

Will the cover fit my water bath?

Covers are made for a particular tank size, and the title does not name one. Measure the inside of your tank or note the bath model, and LabEquip will confirm the fit when you enquire.

Does the cover get hot?

Yes. It sits in the steam above warm water and stainless steel conducts heat, so handle it with gloves at higher set temperatures and open it slowly to let the steam escape.

Can a flask hang from the cover by its neck?

The openings steady flask necks, but the weight of a filled flask should rest on the bath floor, a rack or a ring support. A thin flat plate is not meant to carry a heavy flask on its own.

How should the cover be cleaned?

Wash with warm water and mild detergent, rinse and dry. Use a descaler made for stainless steel if white deposits form around the openings.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)