Quick Answer: The Flat stainless steel bath cover is a plain, flat stainless steel lid with a central handle and rounded corners, as pictured, that rests over a water bath tank to cut heat loss and evaporation while samples are heated.
A Plain Lid for Vessels Below the Rim
When every tube, rack and bottle sits fully below the rim of the tank, a solid flat lid is the simplest cover. The flat stainless steel bath cover lies across the tank, closes the whole surface and lifts off by its handle. Unlike a gabled or domed lid it adds almost no height, so the bath stays compact on the bench.
A flat lid has one known drawback: condensation forms on its underside and drips straight back down, sometimes onto tube caps. For open tubes or plates that must stay dry, a sloped lid that sheds condensate to the sides is the better fit; for capped tubes and bottles, a flat cover does the job well.
The listing photo shows a grey metal plate with rounded corners and a black handle in the middle. The tank it fits is not named in the title, and a cover only works properly when it matches the tank opening, so compare its dimensions with your bath.
Specifications
| Type | Flat lid for water bath tanks |
| Material | Stainless steel, as titled |
| Handle | Central handle, as pictured |
| Shape | Flat plate with rounded corners, as pictured |
| Bath size it fits | Confirm at enquiry |
Care & Handling
- Lift the flat stainless steel bath cover by its handle and tilt it away from you to let steam escape.
- Dry the underside after use; standing condensate leaves water marks and scale.
- Clean with a soft cloth and mild detergent, avoiding chloride bleach.
- Store the cover flat so its corners do not bend.
Applications
- Covering a bath during long incubations of capped tubes and bottles
- Keeping dust and debris out of the tank between uses
- Reducing water loss in baths left running overnight at moderate temperatures
- Helping the bath recover its set temperature faster after vessels are loaded
Why Choose LabEquip
Labs that run water baths for hours, particularly with capped tubes, use a flat cover to keep the temperature and water level steady. LabEquip lists a clear, raised lid for water bath for taller vessels, along with other accessories in General Lab Products; share your tank size through the contact page.
Frequently Asked Questions
When is a flat lid better than a gable lid?
A flat lid adds little height and is easy to store, so it suits baths where all vessels sit below the rim. A gable or domed lid gives headroom for taller vessels and lets condensation run off to the sides.
Will condensation drip onto my samples?
Some condensate forms under a flat lid and can drip back. Keep tubes capped, or use a sloped lid when open vessels must stay free of drips.
Can the cover stay on at high temperatures?
Stainless steel tolerates water-bath temperatures well. The plate and handle become hot at higher set points, so lift it by the handle and use a gloved hand if needed.
How do I know the cover fits my bath?
Measure the length and width of the tank opening and compare them with the cover. A cover that is too small can fall in, and one that is too large may rock on the rim.
Does a lid really save energy?
Yes. Much of the heat lost from an open bath leaves through evaporation at the surface, so covering the tank lets the heater hold the set point with less effort and slows the fall in water level.
What is the cover made of?
The title states stainless steel, which resists corrosion from steam and is easy to wipe clean. The photo shows a dark handle fixed to the centre of the plate.
Last Updated: October 2026










Reviews
There are no reviews yet.