Quick Answer: The external ducted hood with 2 hand passages is a closed, clear-panelled bench enclosure connected to an external exhaust duct; the user works inside it through two round hand openings in the front panel. ‘Hand passages’ is a translated term for these arm ports.
Working Through Two Hand Passages
Most fume hoods have a wide open front. This one closes the front with a panel and leaves just two round openings, one for each hand. The extraction draws air in through those openings, so the inflow at each port is brisk while the total air volume can stay modest. The closed front also shields the face and body from splashes and stops room draughts carrying powders out.
Because it is ducted, contaminated air leaves the building rather than passing through filters back into the room. That allows a wider range of substances than a recirculating enclosure, but it means an extraction fan and ductwork are needed, such as the fan support with 7.5m hose for ø125 outlets, plus a duct damper where airflow needs balancing. Ask LabEquip for this unit’s outlet size before planning the ducting.
The format suits small, repeated tasks: weighing powders, dispensing toxic or odorous liquids, sub-sampling preserved specimens or opening sample containers. Large items cannot pass through the hand ports, so place everything needed inside before starting work.
Applications
- Weighing toxic or fine powders where an open-front hood would let them drift
- Transferring small volumes of odorous or toxic liquids
- Opening and sub-sampling containers of preserved specimens in biology departments
- Handling dusty minerals or soil samples in earth science labs
Specifications
| Product | Ducted bench enclosure with hand ports |
| Front as pictured | Clear panel with two round hand openings |
| Exhaust | To an external duct and extraction fan, not filtered back to the room |
| Typical tasks | Powder weighing, dispensing hazardous liquids, opening sample containers |
| Outlet size and enclosure dimensions | Confirm at enquiry |
Good Working Practice
- Run the extraction briefly before putting hands in the ports, and again after finishing, to clear the enclosure
- Wear sleeves or long gloves that cover the wrists when working through the ports
- Wipe the inside with a damp cloth after powder work rather than brushing dust towards the openings
- Inspect the duct connection and panel joints for gaps that would draw air from the wrong places
Why Choose LabEquip
Labs weighing hazardous powders or decanting toxic liquids at small scale often prefer a closed enclosure to an open hood. LabEquip supplies this external ducted hood with ducting accessories from its general lab products range, and you can describe your extraction set-up through the contact page.
Frequently Asked Questions
Why choose hand passages instead of an open front?
A closed front with two hand openings gives a strong inflow at each port and keeps the face behind a panel. It also reduces the effect of draughts in the room, which helps when weighing light powders.
Does this hood need an extraction fan?
Yes. It is a ducted enclosure, so it relies on an extraction fan and ducting to pull air through and discharge it outside. Without extraction it gives no fume protection.
Can a balance be used inside the enclosure?
A small balance can be placed inside before work starts. The airflow may make readings fluctuate, so a draught shield around the weighing pan helps the reading settle.
Is this the same as a glove box?
No. A glove box is sealed and the user works through attached gloves. This hood has open hand passages, so it relies on inward airflow for protection and is not suited to work needing an isolated atmosphere.
What should I wear when working through the ports?
A lab coat with close-fitting cuffs, gloves long enough to cover the wrists and eye protection. This stops powders or splashes reaching the skin at the gap between glove and sleeve.
Can volatile solvents be used in the external ducted hood?
Small volumes can be handled when the extraction is designed for flammable vapours and discharges safely outside. Check that your ductwork and fan are suitable with a ventilation specialist before using flammable solvents in any enclosure.
Last Updated: October 2026










Reviews
There are no reviews yet.