Quick Answer: The Elbow Action Bib Cock with Shower is a wall-mounted laboratory tap that is opened and closed by a long lever moved with the elbow, fitted with a shower attachment that spreads the water into a spray for rinsing trays, sieves, cages and the sink bowl rather than delivering a single stream.
Spray Rinsing at a Hands-Free Tap
A plain spout delivers one narrow stream, which is fine for filling a flask but slow for rinsing a flat dissection tray, a stack of soil sieves or the inside of a sink after a practical. The shower on this elbow action bib cock breaks the flow into many fine jets that cover a wider area, so loose debris, stain residue or soil comes off with less water and less scrubbing. The elbow lever keeps the valve hands-free, which matters when the person rinsing is holding a dirty item in both hands.
In fittings of this type the shower is usually a hand-held spray head on a flexible hose, so the jet can be pointed into corners and under rims; some designs use a fixed shower rose instead. The listing does not say which arrangement is supplied, or whether a separate spout is included, so that detail should be settled when ordering. The tap body itself is a bib cock: it screws into a threaded point on the wall, projects over the sink and takes water from a single supply line.
Where only a plain outlet is needed, the standard Elbow Action Bib Cock works in the same way without the spray. The shower version earns its place at wash-up sinks that deal with bulky or awkwardly shaped items every day.
Typical Wash-Up Uses
- Rinsing soil, sand and sediment through test sieves in geography and soil-science labs.
- Washing dissection trays, boards and instruments after biology practicals.
- Hosing down animal-house cages, water bottles and bedding trays before disinfection.
- Rinsing roots free of soil before plant-anatomy work and growth measurements.
- Flushing the sink bowl and drainer clean at the end of a session.
Specifications
| Item | Wall-mounted bib cock with elbow lever and shower attachment |
| Operation | Lever moved with the elbow or forearm; no hand contact |
| Outlet | Spray (shower) covering a wider area than a single stream |
| Water supply | Single line, delivered at the temperature supplied |
| Mounting | Screws into a threaded wall point above the sink |
| Shower type and hose length | Confirm at enquiry |
Care & Handling
- Hang or clip the spray head above the sink rim after use, so it never lies in standing water in the bowl.
- Aim the spray low and into the bowl; a strong jet over a shallow sink throws splashes onto the bench and the floor.
- Include the lever in the end-of-day disinfectant wipe, since forearms that push it may have been splashed.
- Keep the hose away from hot plates and burners on neighbouring benches.
Why Choose LabEquip
Glass-wash rooms, animal houses and botany or soil-science labs that rinse bulky items all day are the usual buyers of this tap. LabEquip lists it in General Lab Products; send the wall-thread size and a note of what will be rinsed through the contact page so that the shower arrangement can be confirmed.
Frequently Asked Questions
What is the shower on this bib cock used for?
It spreads the water into a spray for rinsing items that a single stream handles poorly, such as flat trays, sieves, cages and the sink bowl itself. A spray also reaches corners and rims, and uses less water than holding the item under a spout.
Can the shower be used as an emergency eye wash?
No. An emergency eye wash delivers a soft, low-pressure flow to both eyes at once and is kept for that purpose. A sink spray can be too forceful for eyes and is not designed for irrigation, so a dedicated eye wash should be fitted near chemical work.
How is dirty water kept out of the supply?
Keep the spray head hanging above the sink rim, never submerged in a filled bowl. Many plumbing codes also call for a check valve on hose-type outlets, and the plumber fitting the tap can advise what applies to the building.
How does this differ from a plain elbow action bib cock?
Both are wall-mounted, single-supply taps worked by an elbow lever. The plain version ends in a spout that gives one stream, while this one adds a shower for spray rinsing, which helps at wash-up sinks but is unnecessary at a simple handwash basin.
Which labs gain most from a tap with a shower?
Soil and sediment labs, animal houses, histology and botany preparation rooms, and glass-wash areas, where bulky or dirty items are rinsed many times a day. For handwashing alone, a tap without a shower is simpler.
How should the spray head be maintained?
Soak it in dilute citric acid or vinegar when the jets turn uneven or spray sideways, then rinse it well, and inspect the hose and its end washers for cracks and hardening every few months. A head that drips after the lever is closed usually points to a worn seal in the tap.
Last Updated: September 2026










Reviews
There are no reviews yet.