Quick Answer: The Digital water bath with magnetic stirring is a heated water bath built over a magnetic stirring drive, pictured with a round white housing, a viewing window, a lid and a digital controller; a stir bar in the vessel keeps the liquid moving while its temperature is held.
Heating and Mixing in One Unit
A plain water bath warms a flask but leaves its contents still, so a mixture can layer or solids can settle. A hotplate stirrer mixes well but heats only from the base. A water bath with magnetic stirring combines the two: the flask is warmed by water on all sides, and a rotating magnet under the bath turns a PTFE-coated stir bar inside it.
The photo shows a white, round housing with a window in its side, a lid on top, a lit base and a digital control panel. The window lets you watch the liquid and the stir bar without lifting the lid, which helps when the stirring speed has to be judged by eye.
Some users put a bar in the bath water itself to even out the bath temperature; whether this unit’s drive couples through to both bath and flask depends on its design. Bath volume, temperature range and stirring speed are not given in the title.
Applications
- Dissolving solids that need gentle warmth, such as some buffer salts or polymers
- Small syntheses or enzyme reactions that need both mixing and a steady temperature
- Holding a solution at temperature while a reagent is added dropwise
- Teaching labs studying how temperature and mixing affect dissolving or reaction rate
Care & Handling
- Choose a stir bar suited to the vessel and start the water bath with magnetic stirring at low speed so the bar does not decouple.
- Keep the water at the indicated level and use distilled water to limit scale on the window and tank.
- Clean the viewing window with a soft cloth so it stays clear; avoid abrasive pads.
- Keep metal tools and magnetic media away from the stirring drive.
Specifications
| Type | Water bath with magnetic stirring drive |
| Control | Digital controller, as pictured |
| Housing | Round housing with viewing window and lid, as pictured |
| Mixing | Magnetic stir bar driven from below |
| Bath volume, range and speed | Confirm at enquiry |
Why Choose LabEquip
Chemistry and biochemistry labs choose a stirred bath when mixing and a gentle, even heat are both needed. LabEquip lists separate stirrers such as the heating magnetic stirrer 1 L in General Lab Products, and helps compare options through the contact page.
Frequently Asked Questions
Why not just use a hotplate stirrer?
A hotplate heats only the bottom of the flask, which can overheat sensitive mixtures. In a stirred water bath the flask is warmed from all sides and cannot rise above the water temperature.
What stir bar should I use?
A PTFE-coated bar sized to the flask base works for most liquids. Oval bars suit round-bottom flasks, and longer bars give stronger mixing in wide beakers.
Why does the stir bar jump or stop?
It decouples from the magnet when the speed is raised too quickly, the liquid is too viscous or the bar is too small. Lower the speed, then increase it gradually.
Does stirring affect the temperature reading?
Stirring improves uniformity, so readings better represent the whole liquid. Still check the sample with a thermometer when its exact temperature matters.
What is the viewing window for?
It lets you watch mixing, colour changes and dissolving without opening the lid, which keeps heat in and avoids splashes.
Can solvents be heated in this bath?
Only with care: flammable solvents need good ventilation and must stay below their flash point, and the equipment must suit that use. Water-based solutions are the usual load.
Last Updated: October 2026










Reviews
There are no reviews yet.