Search

In Stock

Cover Plate for Stainless Steel Bain-Marie Tank

$5.87

Quick Answer: The Cover Plate for Stainless Steel Bain-Marie Tank is a rectangular stainless steel plate with an open square grid and folded edges, as pictured; rather than a solid lid, it is a grid plate that covers the tank floor so vessels stand on it instead of on the heated base.

Cover Plate or Grid Plate?

The listing calls this a cover plate, but the photo shows an open grid of square holes cut in stainless steel sheet, with the long edges folded down. A plate like this cannot close a bath or stop evaporation. What it does is cover the floor of the bain-marie, so beakers, bottles and tube racks rest on the grid a little above the base, with water free to move underneath. The image file describes it as a protection plate, which fits that role.

Why protect the floor? In many small bain-maries the heater sits under or in the base of the tank. Glass standing on that surface can heat unevenly and crack, and plastic can soften where it touches. A raised grid spaces vessels off the hot zone and lets convection carry heat evenly around them. It also stops small items lying flat on the floor, where they are awkward to pick up.

The plate must match the inner length and width of the tank closely enough not to slide. To lift vessels higher in the water, an elevating grid for water baths is the related accessory; to reduce evaporation, choose a solid lid instead.

Specifications

Material Stainless steel sheet
Form Rectangular plate, open square grid, folded long edges, as pictured
Position in the bath Laid on the tank floor under vessels
Purpose Keeps vessels off the heated base and lets water circulate
Not suitable as A lid to reduce evaporation
Tank size it fits Confirm at enquiry

Typical Uses

  • Standing beakers and bottles in a small bain-marie while warming media or reagents
  • Giving tube racks a level, even surface to stand on
  • Keeping plastic containers off a hot tank floor
  • Melting agar in bottles without the glass touching the heated base

Care & Handling

  • Lift the plate out when draining and descaling the tank, and clean both.
  • Rinse after use, especially after salt or buffer spills, and dry before storing.
  • Check that the plate sits snugly; a plate that slides can tip bottles over.

Why Choose LabEquip

Teaching labs and small microbiology rooms using a stainless steel bain-marie buy this plate as the missing floor grid. LabEquip lists it in General Lab Products; send the tank’s inside dimensions through the contact page so the size can be matched.

Frequently Asked Questions

Is this a lid for the bain-marie?

No. Despite the name, the plate is an open grid, so it does not cover the water surface or cut evaporation. It sits on the tank floor to support vessels.

Why not stand glassware directly on the tank floor?

In many baths the floor is the hottest surface. Glass on it heats unevenly and can crack, and plastics may deform. A grid keeps vessels off that surface and lets water flow beneath them.

Does the plate change the usable water depth?

Slightly. Vessels sit higher by the height of the folded edges, so check that the liquid inside them stays below the bath water level for even heating.

Can it stay in a boiling water bath?

Yes. Stainless steel is unaffected by boiling water. Handle the plate with tongs or gloves when it is hot.

How is scale removed from the grid?

Soak it in a mild descaler such as dilute citric acid, rinse thoroughly and dry. Avoid bleach, which can pit stainless steel over time.

Will it fit any stainless steel bain-marie?

Only a tank whose inner floor matches its length and width. A loose plate slides and can tip vessels, so measure the tank floor before choosing.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)