Quick Answer: The Conical Bottom Centrifuge Tube Rack is pictured as a solid metal block with four large wells, made to hold conical-bottom centrifuge tubes upright; the block form steadies the tubes on the bench and holds heat or cold well.
A Block-Style Rack for Tapered Tubes
Conical-bottom centrifuge tubes cannot stand on their own unless they have a skirt, so they need a holder whose holes support the taper. The item in the photo is not an open plastic rack but a solid metal block with four large, round wells, which gives each tube a deep, close-fitting seat.
A metal block-type rack does more than hold tubes. Its weight keeps it from tipping while tubes are pushed in or capped, and the metal stores heat or cold: chilled in a refrigerator, it keeps tubes cool for a while on the bench; warmed, it keeps them warm. Some blocks of this shape also fit dry-bath heaters, which should be checked for this item.
The title does not give the tube volume the wells take, and conical tubes come in several common sizes. Compare the wells with your tubes; LabEquip also lists a Block for Conical Tube and plastic racks for 15/50 ml centrifuge tubes.
Specifications
| Type | Rack for conical-bottom centrifuge tubes |
| Form | Solid metal block with four large wells, as pictured |
| Use | Holds tubes upright; can be pre-chilled or pre-warmed |
| Wells | Four, as pictured |
| Tube size and heater fit | Confirm at enquiry |
Care & Handling
- Dry the conical bottom centrifuge tube rack well after cold use; condensation collects at the bottom of the wells.
- Clean the wells with a soft bottle brush and mild detergent, not abrasive pads.
- Handle a warmed or chilled block with gloves.
- Keep the block dry in storage so the metal does not mark or stain.
Applications
- Holding conical tubes upright while they are filled, capped or decanted
- Keeping tubes cool on the bench after the block is chilled in a refrigerator
- Standing tubes in a stable, weighted holder next to a centrifuge
- Warming tubes evenly when the block suits a dry-bath heater
Why Choose LabEquip
Cell culture, microbiology and molecular biology labs use a weighted holder when conical tubes must stay upright and cool or warm. LabEquip lists metal blocks and plastic racks for these tubes in General Lab Products; confirm tube sizes through the contact page.
Frequently Asked Questions
Why is this rack made as a metal block?
A metal block is heavy and stable, gives each conical tube a close-fitting seat and holds heat or cold for some time after it is warmed or chilled.
How many tubes does it hold?
The photo shows four wells. For more tubes at once, a plastic rack with more positions may suit bench work better.
Which tube size fits?
The well size is not given in the title. Measure your tubes’ outside diameter and length and compare them with the wells before ordering.
Can the block go in a dry bath?
Only if it matches the heater’s block opening. Check the block’s footprint against your dry bath before using it as a heating block.
How do I chill the block?
Place it in a refrigerator for some time before use, then wipe off condensation and add the tubes. Put it back between steps to keep it cold.
Can tubes without a skirt stand in it?
Yes. The wells support the tapered bottom, so skirtless conical tubes stand upright without help.
Last Updated: October 2026










Reviews
There are no reviews yet.