Search

In Stock

Separatory Funnel Holder, Plastic

Non-Corrosive Polymer Architecture: Molded from high-impact, medical-grade polypropylene, these holders are immune to the degradation caused by volatile chemical vapors, ensuring long-term structural integrity in harsh laboratory atmospheres.

Tension-Adjustable Open-Front Design: Features a specialized geometry with an integrated thumb-screw mechanism, allowing for precise diameter adjustments and quick vessel insertion while maintaining a stable, vibration-free hold during phase separation.

$3.78

Quick Answer: A separatory funnel holder is a support that keeps one or more separating funnels upright and steady while their liquid layers settle and are drained. This plastic version takes the place of the iron ring and retort stand often used for the job, and plastic does not rust in acid fumes.

Holding the Funnel Still While Layers Separate

Liquid-liquid extraction depends on patience. After shaking and venting, the separatory funnel must stand undisturbed until the two layers are sharp, and it must stay upright while the lower layer is run off through the tap. Any wobble remixes the interface. A holder gives the funnel body a secure seat, with the stem passing through an opening so a beaker or flask can be placed underneath.

Plastic holders are light, easy to wipe clean and unaffected by the splashes of dilute acid or alkali that are common in extraction work. Polypropylene, a common choice for such supports, softens with heat and may swell in some organic solvents, so wipe off solvent spills promptly.

The holder is meant for funnels such as the separating funnel and the glass separatory funnel.

Specifications

Item Support for separatory (separating) funnels
Material Plastic, per the listing title
Function Holds funnels upright for settling and draining layers
Advantages Light, rust-free, easy to clean

Applications

  • Supporting separating funnels during solvent extraction of iodine or organic products
  • Keeping funnels steady through long settling times, such as when an emulsion is slow to break
  • Holding several funnels side by side, where a multi-position holder is chosen
  • Standing funnels upright to drain and dry after washing

Care & Handling

  • Check that the funnel sits level and cannot tip before filling it.
  • Place a tray under the holder during extractions so solvent spills are contained.
  • Wipe the holder with water and mild detergent, and remove organic solvent splashes quickly.
  • Keep it away from hot plates and burners.

Why Choose LabEquip

Organic chemistry teaching labs, pharmacy colleges and QC laboratories that run frequent extractions use a separatory funnel holder to free up retort stands and keep funnels secure. Find it under LabEquip’s chemistry lab equipment and confirm the funnel sizes it must hold via the contact page.

Related Products

  • Separatory Funnel, Plastic: A pear-shaped plastic separatory funnel with stopcock, for extractions where glass breakage is a concern.
  • Glass Separatory Funnel: A glass separatory funnel for extractions with solvents that may soften plastic.
  • Funnel, Separating: A separating funnel with stopper, stopcock and outlet stem for solvent extraction.
  • Funnel Holder, Plastic: A plastic funnel holder that clamps to a stand rod, for supporting a funnel at a chosen height.

Frequently Asked Questions

Why use a separatory funnel holder instead of a ring on a retort stand?

A separatory funnel holder gives the funnel body a steady seat and keeps it upright while the layers settle and the lower layer is drained. This plastic holder does the job of an iron ring and stand, but it is light, easy to wipe clean and does not rust in acid fumes.

How do I know the holder will fit my separating funnels?

The opening must be wide enough for the stem and the narrow lower part of the funnel to pass through, but narrow enough that the body rests on it without tipping. Try the largest and smallest funnels used in the lab in the holder before the practical.

How long should the layers in a separating funnel be left to settle?

Leave the funnel in the holder until there is a sharp boundary between the two layers and both are clear. If a cloudy emulsion forms, swirl gently, wait longer or add a little saturated salt solution to help the layers part.

Is a plastic funnel holder safe near organic solvents?

The holder supports the funnel rather than holding solvent, so only splashes reach it. Polypropylene, a common resin for such holders, resists dilute acids, alkalis and most splashes, but wipe off chlorinated or aromatic solvents straight away, since they can soften some plastics.

Where should the receiving flask go under a separating funnel?

Place a beaker or conical flask directly below the stem, with the stem tip just inside the mouth or touching the inner wall. Liquid then runs down the wall without splashing, and the vessel is easy to swap when the second layer is collected.

How do I drain the lower layer cleanly from a separating funnel?

Take out the top stopper first so air can enter, then open the tap and let the lower layer run out, slowing down as the boundary nears the tap. Close the tap as the boundary reaches it, and pour the upper layer out through the top.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)