Quick Answer: A straight delivery receiver adapter is a straight glass fitting that extends the outlet of a condenser directly to the receiving vessel without any bend. It is used where the condenser already points downwards, such as vertical or steeply inclined condensers.
When No Bend Is Needed
A bend exists only to redirect a sloping condenser’s output into an upright receiver. When the condenser itself stands vertically, as a coil or double-surface condenser often does in a downward distillation, a bend would send the liquid sideways. The straight adapter simply continues the line, taking the condenser outlet at one end and delivering into a flask, cylinder or separating funnel directly underneath at the other.
Straight adapters also work as extensions. Added below a condenser, they lengthen the delivery so the tip reaches a receiver held lower down, or passes through the neck of a collecting vessel placed in a cooling bath. In recovery and water-distillation set-ups where the condenser descends steeply, the straight pattern keeps the path short and without low points where liquid can hang.
Details are not in the title: joint size, length and whether the lower end is a cone or a drip tube.
Care & Handling
- Mount a vertical condenser and straight adapter with the receiver clamped separately, so no weight hangs on the lower joint.
- Check that the straight path stays vertical; a leaning adapter directs drops onto the receiver neck instead of into it.
- Clean it by drawing a bottle brush straight through, which is easier than on bent patterns.
Specifications
| Type | Receiver adapter, straight delivery |
| Shape | Straight, continuing the condenser axis |
| Condenser end | Ground joint for the condenser outlet |
| Side tube | None named in the title |
Applications
- Downward distillation with a vertical coil or double-surface condenser
- Solvent recovery where distillate runs straight into a collection flask or separating funnel
- Extending a condenser outlet into a receiver sitting in a cooling bath
- Rebuilding compact stills where the condenser stands vertically above the receiver
Why Choose LabEquip
Solvent-recovery users and labs running vertical-condenser distillations order the straight adapter to complete their sets. LabEquip lists it in the chemistry lab equipment range together with the Graham coil condenser, which is often used upright; ask for joint sizes on the contact page.
Related Products
- Receiver Adapter, Sloping Delivery: A sloping delivery adapter for receivers placed forward of a condenser set at an angle.
- Receiver Adapter, Vertical Delivery, Socket To Cone: A vertical delivery adapter with socket and cone for a jointed receiver directly below.
- Receiver Adapter, Vertical With Vacuum Connection: A vertical adapter with a vacuum side tube for upright condensers under reduced pressure.
- Recovery Assembly: A solvent recovery assembly, a set-up where a steeply descending condenser and straight delivery are common.
Frequently Asked Questions
When should a straight delivery adapter be used instead of a bent one?
Use it when the condenser already points downwards, as a vertical coil or double-surface condenser does in a downward distillation. A bend would send the liquid sideways; the straight adapter simply continues the line into the receiver directly underneath.
Can a straight receiver adapter be used as an extension piece?
Yes. Added below a condenser, it lengthens the delivery so the tip reaches a receiver held lower down, or passes through the neck of a collecting vessel standing in a cooling bath. Clamp the extended assembly so the joint is not carrying a long lever.
Does a straight delivery adapter have a vent?
No side tube is named in its title, so it vents only through an open receiver. If its lower end is sealed into a jointed receiver, the set must vent somewhere else before it is heated.
Which condensers are used vertically with a straight adapter?
Coil and double-surface condensers drain well in a vertical position and are often used that way in solvent recovery and water stills. A Liebig condenser is normally sloped for distillation, so it usually needs a bent adapter instead.
Does a straight adapter help avoid liquid hold-up?
Yes. With a steep or vertical condenser, a straight path has no bends or low points where liquid can collect, so the distillate drains fully into the receiver. That matters when every drop of a small product counts.
How do I stop drops from missing the receiver under a straight adapter?
Check that the condenser and adapter hang truly vertical, clamp the receiver directly beneath, and let the tip enter just inside the receiver neck. A slight tilt is enough to make drops run down the outside of the tip instead of falling in.
Last Updated: November 2026










Reviews
There are no reviews yet.