Quick Answer: A horizontal pipette stand is a bench rack that supports pipettes lying flat, across notched supports, so the tips never touch the bench. It is used to rest pipettes between measurements during titrations and analysis.
Resting Pipettes Flat Between Measurements
During a titration or a set of dilutions, a pipette is used, set down and picked up again several times. Laid on the bench it rolls, its tip picks up dust and residue, and a long bulb pipette is easily knocked onto the floor. A horizontal stand gives each pipette a cradle above the bench, with the tip held in the air.
Horizontal racks suit long pipettes, which are awkward to stand upright, and they are stable because nothing is held high above the base. They are less suited to drain-drying after washing, because water lies in the stem instead of running out; for that job, stand pipettes tip down in a vertical pipette stand.
Keeping a separate pipette for each solution, and labelling its place on the stand, is a simple way of avoiding cross-contamination.
Care & Handling
- Place pipettes with the tip pointing away from the working area so it is not brushed by sleeves.
- Let each pipette drain into the correct vessel before laying it down; liquid left inside can run towards the top and reach the filler.
- Clean the supports with mild detergent after acid or dye spills.
Specifications
| Item | Rack holding pipettes horizontally on notched supports |
| Orientation | Pipettes lie flat with tips raised off the bench |
| Suits | Graduated and volumetric pipettes in regular use |
| Placement | Bench top beside the titration or dilution set-up |
Applications
- Holding volumetric pipettes between aliquots in acid-base and redox titrations
- Keeping graduated pipettes ready during serial dilutions in biology and microbiology practicals
- A clean resting place at each student station, with one labelled pipette per solution
- Holding long pipettes where an upright stand would be unstable or too tall, such as inside a fume cupboard
Why Choose LabEquip
Chemistry teachers and analysts who want pipettes within reach on each bench, rather than at a central store, use horizontal stands at individual workstations. It is part of LabEquip’s chemistry lab equipment range; send notch sizes or quantities through the contact page.
Related Products
- Pipette Stand, Horizontal, Wooden: A wooden horizontal pipette stand with notched uprights holding pipettes in tiers.
- Pipette Stand (Vertical): A vertical stand for draining pipettes tip down after washing, which a flat rack cannot do.
- Pipette Stand (94 Pipettes Rotary): A 94-position rotary stand for storing a whole class set of pipettes in a small footprint.
- Pipette, Bulb Type (Clear Glass): A clear glass bulb pipette of the long kind that rests steadily on a horizontal stand.
- Fast Releaser Pipette Pump: A thumbwheel pipette pump for filling the pipette before it goes back onto the stand.
Frequently Asked Questions
What is the difference between a horizontal and a vertical pipette stand?
A horizontal pipette stand rests pipettes flat across notched supports with the tips held in the air, which suits pipettes in use during a titration. A vertical stand holds pipettes upright, tip down, which suits draining and drying after washing.
Why should a pipette tip be kept off the bench between measurements?
The bench surface carries dust, splashes and residues from earlier work. A tip resting on it can pick these up and carry them into the next solution, or roll and chip. The horizontal stand keeps the tip clear and the pipette from rolling.
Can a pipette rest horizontally with liquid still inside?
No. Laid flat, liquid in the pipette can run into the filler or out of the tip. Empty the pipette before placing it on the horizontal stand, and if it is to be reused for the same solution, keep it there only between measurements.
Is a horizontal stand suitable for long bulb pipettes?
Yes. Long bulb pipettes are awkward to stand upright and easily knocked over, but they lie steadily on a horizontal stand. Nothing is held high above the base, so the stand itself is stable.
How many pipettes should a titration station keep on the stand?
Usually one pipette per solution: one for the unknown being sampled and one for any standard or reagent measured by pipette. Keeping each pipette for one solution, labelled if necessary, prevents cross-contamination and saves rinsing between aliquots.
How should a horizontal pipette stand be cleaned?
Wipe the supports with a damp cloth and mild detergent, rinse and dry them, paying attention to the notches where drips collect. Clean spills of acid or alkali promptly so they do not dry on the stand and transfer to pipettes.
Last Updated: November 2026










Reviews
There are no reviews yet.