Search

In Stock

Fast Releaser Pipette Pump

Ergonomic Thumbwheel Actuation: Engineered with a high-friction thumbwheel mechanism that enables precise meniscus adjustment and fractional volume aspiration, ensuring superior repeatability for sensitive titration and reagent preparation protocols.

Instantaneous Fast-Release Lever: Features a spring-loaded plunger release system that allows for immediate, gravity-based liquid expulsion, significantly increasing workflow velocity in high-volume diagnostic and molecular biology applications.

₹467.00

Quick Answer: A fast releaser pipette pump is a hand-held pipette filler in which a thumbwheel raises or lowers liquid in the pipette, and a quick-release lever empties it at once. It replaces mouth pipetting with safe, one-handed control.

Thumbwheel Control With a Quick Release

The listing image shows pump bodies in blue, green and red, each with a soft chuck at one end, a thumbwheel on top and a release lever. The pipette’s upper end is pushed gently into the chuck. Turning the thumbwheel one way draws a piston back and lifts the liquid; turning it the other way lowers the liquid to the mark. Pressing the lever vents the pump so the pipette drains straight away, which is what the “fast releaser” name refers to.

Pumps of this pattern are made in sizes for different pipette capacities, and the body colour usually shows which size a pump suits. Check that the pump matches the pipettes you use, since a pipette that is too narrow will not seal and one that is too wide will not enter the chuck.

Thumbwheel pumps are slower to fill than a rubber bulb but far more controlled when setting a meniscus on the line, which is why they are preferred for graduated pipettes and for class titration work while students are still learning technique.

Applications

  • Filling volumetric pipettes to the mark for acid-base titrations
  • Delivering measured volumes from graduated pipettes in a dilution series
  • Replacing mouth pipetting in school and college labs
  • Handling mildly hazardous solutions where a rubber bulb gives too little control

Specifications

Item Thumbwheel pipette pump with quick-release lever
Operation Thumbwheel to fill and set the level; lever to release
Fits Graduated and volumetric pipettes of the matching size
Colours Pump bodies shown in blue, green and red in the listing image

Care & Handling

  • Insert the pipette with a gentle twist, holding it near the top, to avoid snapping the glass.
  • Never draw liquid into the pump itself; if it happens, flush and dry the pump before further use.
  • Keep the pipette pointing down while it holds liquid, and never lay the filled assembly tip-up.
  • Wipe the chuck and body with a damp cloth rather than immersing the pump.

Why Choose LabEquip

Schools and colleges that have stopped mouth pipetting need a pump at every titration station, usually in two or three sizes. LabEquip lists this pump in its chemistry lab equipment range; tell us your pipette sizes through the contact page.

Related Products

Frequently Asked Questions

How do you use a thumbwheel pipette pump?

Push the top of the pipette gently into the soft chuck with a slight twist, holding the pipette near its top. Dip the tip in the liquid and roll the thumbwheel to draw liquid above the mark, then roll it back to lower the meniscus exactly to the mark. Move the pipette to the receiving vessel and roll the wheel to dispense.

What does the quick-release lever on a pipette pump do?

Pressing the lever vents the pump so air rushes into the pipette and the liquid drains out at once by gravity, instead of being wound out slowly with the thumbwheel. It saves time when a pipette must be emptied completely, for example when delivering a full volume from a volumetric pipette or discarding a rinse.

Why use a pipette pump instead of mouth pipetting?

Mouth pipetting risks swallowing or inhaling toxic, corrosive or infectious liquids and is banned in laboratories. A pipette pump draws liquid up mechanically and holds it steady, and the thumbwheel gives finer control of the meniscus than a rubber bulb. It also lets the user work one-handed, keeping the other hand free for the vessel.

Do pipette pumps of different colours fit different pipettes?

In many ranges each colour of pump fits a different size of pipette, so the colour helps users pick the right one quickly. What matters is that the pipette top fits the chuck snugly: a loose fit leaks air and the liquid creeps down, while forcing an oversized pipette can crack the glass. Match each pump to the pipettes it fits.

What should be done if liquid is drawn up into the pipette pump?

Stop at once and remove the pipette. Rinse the chuck and lower body as the maker’s instructions allow, usually with water followed by distilled water, and let it dry fully before use. Over-filling is avoided by watching the meniscus and turning the wheel slowly as it approaches the top of the pipette.

Can a thumbwheel pipette pump be used with volumetric pipettes?

Yes. This pump is listed for graduated and volumetric pipettes of the matching size. With a volumetric (bulb) pipette, fill just above the single mark, lower the meniscus to it with the wheel, then deliver into the flask, letting it drain and touching the tip against the inside wall as the pipette’s calibration requires.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)