Quick Answer: A Nessler cylinder stand is a rack that holds several Nessler cylinders upright and level, side by side, so the colour or turbidity of their contents can be compared by looking down through the liquid columns. It is used in water analysis and pharmacopoeial limit tests.
Why Nessler Tubes Need a Dedicated Stand
Nessler comparison works by viewing a tall column of liquid from above, against a white background, where a faint tint becomes visible because light passes through the whole depth of solution. The test and the standard must stand at the same height, vertical and close together, or the comparison is unfair. The stand holds the tubes in exactly that arrangement and keeps them from being knocked over while reagents are added and colour develops.
Designs vary: many place the cylinders over a white or opal base so light passes up through the columns, and some older patterns use an angled mirror beneath the tubes. A plastic stand does not corrode from the acids and ammonium solutions used in these tests.
It is made for flat-bottomed cylinders such as the Nessler cylinder listed in this range or the glass Nessler tube cylinder. Check that the diameter of your cylinders matches the stand openings before ordering in quantity.
Applications
- Nesslerisation of water samples, where Nessler’s reagent gives a yellow to brown colour with ammonia and the sample is matched against standards
- Limit tests for chloride and sulfate in pharmacy practicals, comparing the opalescence or turbidity of the test with a standard
- The limit test for iron, in which a pink to purple colour is compared with a standard solution
- Any visual colorimetric series in which a sample is bracketed between prepared standards
Care & Handling
- Wipe up spilled Nessler’s reagent immediately; it contains mercury compounds, so collect the waste for hazardous disposal rather than washing it down the sink.
- Keep the viewing base clean and unscratched, since marks on it look like colour differences in the tubes.
- Rinse the stand with water after acid or ammonia spills and let it dry before storing.
Specifications
| Item | Stand holding Nessler cylinders upright, side by side |
| Material | Plastic; listing image filename indicates polypropylene |
| Holds | Flat-bottomed Nessler cylinders of matching diameter |
| Viewing | From above, through the liquid column, against a light background |
Why Choose LabEquip
Water-testing labs, public health training centres and pharmacy colleges that teach limit tests buy the stand together with matched cylinders. LabEquip also supplies pharmacy lab equipment for these courses; tell us your cylinder size and number of positions through the contact page.
Related Products
- Cylinder, Nessler: Flat-bottomed Nessler cylinders with an etched mark, the tubes this stand is made to hold.
- Glass Nessler Tube Cylinder: Glass Nessler tube cylinders with graduations for colorimetric comparison in water testing.
- Nessler Cylinder Stand, Aluminium: An aluminium two-tier Nessler stand, a metal alternative to this plastic stand.
- Pipette, Bulb Type (Clear Glass): A single-mark bulb pipette for measuring sample and standard aliquots accurately into each cylinder.
Frequently Asked Questions
What is a Nessler cylinder stand used for?
A Nessler cylinder stand holds several Nessler cylinders upright, level and side by side, so a test solution can be compared with standards by looking down through the liquid columns. It is used for colour and turbidity comparisons in water analysis and pharmacopoeial limit tests.
Why are Nessler tubes compared by looking down from above?
Looking down the full depth of liquid makes a faint tint far easier to see than looking through the narrow side of a tube. That only works if the test and standard stand vertically at the same height against the same light background, which is exactly what the stand provides.
Where should the Nessler stand be placed for the best comparison?
Place it on a white surface or tile in even daylight or diffuse light, away from coloured walls and direct sun. Light passing up through the base of each tube then shows any difference in colour or cloudiness. Keep the tubes in the same positions throughout a comparison.
Is a plastic Nessler stand affected by the reagents used in limit tests?
Polypropylene, the material indicated by the listing image filename, resists dilute acids, alkalis and most aqueous reagents. Wipe spills of reagents such as Nessler’s reagent promptly and rinse the stand with water so no residue builds up around the tube holes.
Do Nessler cylinders need to be matched to each other?
Yes. Cylinders compared together should have the same internal diameter, glass colour and height to the mark, so equal concentrations give the same depth of colour. Use cylinders from one matched set and stand them in neighbouring positions on the stand.
How long should the colour develop before the tubes are compared?
Follow the time given in the method being used. Reagents are added to test and standard in the same way and at the same moment, and both are compared after the same standing time, because colour can keep developing or fading after mixing.
Last Updated: November 2026










Reviews
There are no reviews yet.